User manual

When installing the
purification plate, be
sure the metal tabs are
making contact with
the screen on each
side
of the plate.
2
2. Replace
the two (2)
thumbscrews
and tighten.
1
1. Slide the RCI cell up
and into the unit.
Be sure the back
lip of the RCI cell
engages the two
slotted protrusions
at the rear of the
plate cage, and that
the angle brackets
and studs are
correctly aligned.
INSTALLING THE RCI CELL & PURIFIER PLATE
4
4. Gently
insert the
purifier
plate
between
the guides
(inside the
cage) until
it stops.
To Install:
Rear Lint Screen
follow steps 5 - 9
Purifier Plate
follow steps 4 - 9
RCI cell
follow steps 1 - 9
INSTALLING THE REAR LINT SCREEN
5
9
9. Reinstall the
power cord.
6
6. Secure the
top of the
lint screen by
replacing the
two (2) lint
screen holder
thumbscrews.
5. Replace
the rear
lint screen,
inserting
the bottom
of the lint
screen first.
Note: The bottom
of the rear lint
screen is held
into place by two
alignment guides
(see inset).
8
8. Replace
the back
cover
screw.
7
7. Replace
the back
cover by
snapping
into place
For disassembly instructions,
see page 8.
3
3. Insert the RCI
cell connector
into the plug
on the plate
cage. Press
the connector
firmly until the
two tabs lock
into place.
8 9
WARNING: Do not operate
Fresh Air by EcoQuest without
the rear lint screen and back
cover properly installed.
englishspanish