Full Product Manual

11
US
CONTROLS
The controls are positioned on the front of the unit
next to the damp air inlet duct, they are:
1. Humidistat
2. Remote Humidistat Switch
3. Remote Humidistat Jack Plug Socket
Auto reset. If there is a power out, the dehumidier
will automatically restart when the mains power is
reconnected.
MOUNTING
The dehumidier can be mounted in any direction
even up-side-down.
Turn the feet out to see the anchoring points. Secure
all four feet with suitable xings (not provided) to
oor, wall or ceiling.
STAND-ALONE OPERATION
Connect the unit to suitable mains supply and connect ducting,
Ensure the ‘Remote Humidistat’ switch is set to the ‘OFF’ position (O).
Turn humidistat to lowest humidity level continuation or set the switch to the ‘ON’ position (I). The fan will start.
Set the humidity level right for the room to be dried.
OPERATION |
+
1
2
3