Full Product Manual

OPERATION (2) |

NOTE: A low setting of say 10% means the room is regulated to a very dry level while a setting of say 90%

the room will be maintained at a relatively humid level. The right level for the room may vary with weather,

temperature and occupation conditions over time.

REMOTE OPERATION

For remote operation it is necessary to connect a 24V external humidistat (not provided)

via the jack plug connector. The external humidistat may be obtained from your appliance

supplier. Ensure the “Remote Humidistat” switch is set to I (ON). The dehumidier will now

be controlled by the remote humidistat that is using low power and only 24V.

CLEANING

Disconnect from the mains before cleaning or servicing the unit or any of its components.

Wipe regularly clean with a moist cloth (a soft, damp cloth) and a mild household

detergent, Never use chemicals, petrol, aggressive detergents or other cleansing solutions

AIR FILTER

The dehumidier has an inlet air lter. This should be

checked periodically and if necessary cleaned.

It can be cleaned with a vacuum cleaner or hand

washed in mild detergent only.

Replacement lters are available from your supplier.

ATTENTION: Do not run the unit without a lter tted

as dust will impair the performance of the Rotor.