CM C US READ AND SAVE THESE INSTRUCTIONS OWNERS MANUAL
READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USING THIS AIR MOVER! VOLTS 115V POWER 1/4HP CYCLE 60Hz MAX AIR VOLUME 1100CFM AMPS 2.
Problem Unit will not run. Cause Solution 1. No power to nuit. 2. Switch not on. 3. Switch is faulty. 4. Faulty/broken cord or motor wire 1. Plug unit in. Check circuit breaker. 2. Place in “ON” position. 3. Replace switch. 4. Perform continuity check, using volt/amp meter. Repair/replace faulty broken wire. 1. Unit has been severely jolted causing blower wheel 1. Remove motor and replace damaged motor Unit runs but air mover makes to rub against housing. mounts. loud scraping noise. 2.
FLAT AIR MOVER 1 9 10 1 3 1 5 7 11 14 12 13 5 1 3 ITEM NUMBER 4 6 8 1 2 PART NUMBER DESCRIPTION QTY 1 LP250-01 SCREW 2 LP250-02 RIVET 20 4 3 LP250-03 WIRE GRILL 1 4 LP250-04 HOUSING 1 5 LP250-05 AC MOTOR 1 6 LP250-06 RUBBER FEET 4 7 LP250-07 FAN BLADE 1 8 LP250-08 OUTLET GRILL 1 9 LP250-09 GFCI OUTLET 1 10 LP250-10 CIRCUIT BREAKER 6 11 LP250-11 ROCKER SWITCH 1 12 LP250-12 POWER CORD 1 13 LP250-13 STRAIN RELIEF PLUG 1 14 LP250-14 STRAIN RELIEF PLUG NUT
