User's Manual

2/5
TheSatelliteSpeaker

GettingStarted
WeknowyouareexcitedtoexperienceyournewSpeakerDuo.Thesetwoeas ystepswillgetyouupandrunningquickly.
Step1:ChargeIt
ConnectyourSpeakerDuomatrixcasetoanoutletusingtheincludedpoweradapter.Itwillstartchargingthematrixcase.
Slidethe
satellitespeakersintothecaseforcharging.Theredbacklightwillslowlyflashduringchargingandgoesoutwhen
ithasreachedacompletecharge(Approx.3.5hours).

Step2:Connectit
There are two options for connecting to your Speaker Duo‐wirelessly by Bluetooth© or wired using theincluded aux
cable.
z ConnectWirelessly
Turnonthe powerofthematrixcasefollowedbypoweringoneachofthe 2
satellitespeakers.Oncethebaseispowered 
ontheBluetooth©indicatorwilllightandatoneconfirmingthattheunitiscurrentlyinparingmodewillsound.
GototheBluetooth©settingsonyourmobilephone,tabletorcomputertofind thedevicenamed“SpeakerDuo”.Atone
will sound to confirm thedevice has
 paired successfully. Next time the Speaker Duo and connecteddevice will pair
automatically.Aftercompletingthisstepyouarereadytostartplayingaudiofromyourconnecteddevice.
HoldthePlay/Pausebuttonfor5secondswilldisconnecttheconnecteddeviceandenterpairingmodeforpairinganew
device.
z DirectConnection
TheSpeakerDuocanalsobeconnectedtoanydevicethathasaheadphonejackorlineoutusingtheincludedauxcable.
Pleasenotetheplay/pausebuttononlyoperateswhenconnectedviaBluetooth©.
(1) SpeakerDriver
(2) L/Rswitch
(3) Charging&ConnectionIndicator
(4) Power/Pair
(5) ChargingPin