User's Manual

 4/5
Charge
Whenthepowerislow,abeepwillcomesoutfromthespeaker,pleasechargethespeakerwhenyouheardthebeep.
1. ConnectthestandardUSBendofthesuppliedUSBcabletoaUSBpowersource(likePC,USBpoweradapter…etc.)
2. ConnecttheMicroUSBjackto
theUSBchargingportintheunit.Thechargingindicatorwilllightupwhilecharging
3. Itwilltakeabout2hourstofullychargetheBluetoothspeaker
4. TheLEDindicator will stay on while charging, and goes off after fully charged.
Note:iftheunitisnottobeusedlongerthan7days,pleasechargetheunitfor
10minutesbeforeturnontheunit.
Connection
Laptop/notebook/PC
As the Bluetooth© versions for these types of devices varies greatly, the connection methods wi ll differ as well. If you
cannot connect with the Cute Bluetooth Speaker using the previous method instructed you may need to install a
 new
versionoftheBluetooth©driver.
Pleasereferencetheinstructionsofdevicefordetails.

Technicalparameters
Note:Allspecificationsaresubjecttochangewithoutnotice.
ProductName:Cute 
ModelName：HL6606
PowerSupply:USB5V
Built‐inLithiumIonbatteries:3.7V320mAh
Outputpower:RMS1.5Wx2
BluetoothProfileSupported:A2DP,AVRCP
Workingrange:upto8‐10m
Workingatmosphere:0℃‐40℃/2 0 % ‐90%RH

Maintenance
Pleasefollowtheinstructionsbelowbeforecleartheunit
z Powerofftheunitfirstbeforeclear
z Useasoft,dry,lint‐freeclothtowipegently
z Donotusealcohol,benzene,thinnersorotherchemicaldetergentsasthesecancausethecasingtobewarpedor
discolored
Storage
z Iftheunitwillnotbeusedforanextendedperiodoftime,powerofftheunitandplacetheunitwithaccessoriesinto
thepackage
z Donotsettheunitinadamp,hightemperatureorthesunpoint‐blankplace



