SDS

ECOSCRAPS SLOW RELEASE FERTILIZER
4-2-0
Page:4/10
Version:
1.0
Date of issue/Date of revision:
08/22/2019
Date of previous issue:
00/00/0000
product has caused environmental pollution (sewers, waterways, soil
or air).
Methods and materials for containment and cleaning up
Spill
:
Move containers from spill area. Approach release from upwind.
Prevent entry into sewers, water courses, basements or confined areas.
Avoid dust generation. Do not dry sweep. Vacuum dust with
equipment fitted with a HEPA filter and place in a closed, labeled
waste container. Dispose of via a licensed waste disposal contractor.
Note: see Section 1 for emergency contact information and Section 13
for waste disposal.
Section 7. Handling and storage
Precautions for safe handling
Protective measures
:
Put on appropriate personal protective equipment (see Section 8). Do
not ingest. Avoid contact with eyes, skin and clothing. Keep in the
original container or an approved alternative made from a compatible
material, kept tightly closed when not in use. Empty containers retain
product residue and can be hazardous. Do not reuse container.
Advice on general occupational
hygiene
:
Eating, drinking and smoking should be prohibited in areas where this
material is handled, stored and processed. Workers should wash hands
and face before eating, drinking and smoking. Remove contaminated
clothing and protective equipment before entering eating areas. See
also Section 8 for additional information on hygiene measures.
Conditions for safe storage,
including any incompatibilities
:
Store in accordance with local regulations. Store in original container
protected from direct sunlight in a dry, cool and well-ventilated area,
away from incompatible materials (see Section 10) and food and
drink. Keep container tightly closed and sealed until ready for use.
Containers that have been opened must be carefully resealed and kept
upright to prevent leakage. Do not store in unlabeled containers. Use
appropriate containment to avoid environmental contamination.
Section 8. Exposure controls/personal protection
Occupational exposure limits
None.
Appropriate engineering controls
:
Good general ventilation should be sufficient to control worker
exposure to airborne contaminants.
Environmental exposure controls
:
Emissions from ventilation or work process equipment should be
checked to ensure they comply with the requirements of
environmental protection legislation. In some cases, fume scrubbers,
filters or engineering modifications to the process equipment will be
necessary to reduce emissions to acceptable levels.
Individual protection measures
Hygiene measures
:
Wash hands, forearms and face thoroughly after handling chemical