Specifications

www.ecosmartfire.com 10
ENGLISHClearances & Installation
Top Tray
The incorporation of a Top Tray (“Twin Skin”) into your setting protects against heat transference and aids
in the collection of any accidental spillage. If utilising one that is not supplied by The Fire Company Pty Ltd
then it must undergo a “water tight” test prior to inserting the EcoSmart™ Burner into place.
When installing multiple Burners a maximum of three (3) Burners may be installed into the one “Twin Skin”
(excluding the XL Burner which can only have one (1) Burner per Top Tray). It is imperative that when installing
multiple burners you consider strongly the impact of any accident and minimise it wherever possible.
The Top Tray (“Twin Skin”) when included with the Burner Kits are to be fitted directly into the burner shelf
from above. The Burner is then inserted into the Top Tray setting and sits flush - as illustrated below.
The size of the cut-out should not give more than 5mm [0.196in] clearance.
Cut Out
Top T r ay
[35]
888mm
[6.8]
173mm
[4.8]
123mm
XL Burner
Cut Out
Top Tray
[34.6]
880mm
[11.7]
298mm
[4.7]
120mm
Triple Burne
r
Burner
Cut Out
min
[12.6]
320mm
min
[6.3]
160mm
Around Burner: A Top Tray is not required. The Around Burner tray is “formed” which eliminates the need
for welding and therefore the risk of leaks.
Burner Kits Cut Out Dimensions
(SUPPLIED Top Tray)
Height x Width x Depth
Metric mm, Imperial [in]
Cut Out Dimensions
(EXCLUDING SUPPLIED Top Tray)
Height x Width x Depth
Metric mm, Imperial [in]
Burner One
120 x 298 x 298
[4.7 x 11.7 x 11.7]
120 x 275 x 275
[4.7 x 10.8 x 10.8]
Burner Two
120 x 298 x 298
[4.7 x 11.7 x 11.7]
120 x 275 x 275
[4.7 x 10.8 x 10.8]
XL Burner
123 x 888 x 173
[4.8 x 35 x 6.8]
120 x 885 x 166
[4.7 x 33.6 x 6.5]
Around Burner NA
160 x 320 x 320
[6.3 x 12.6 x 12.6]
Triple Burner
120 x 880 x 298
[4.7 x 34.6 x 11.7]
All setting must incorporate
the supplied Triple Tray