Specifications

PLEASE READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE
INSTALLATION AND USE OF THE PRODUCT. FAILURE TO DO SO COULD CAUSE PROPERTY
DAMAGE, SERIOUS PERSONAL INJURY OR DEATH, AND WILL VOID THE WARRANTY.
THE WATER HEATER MUST BE INSTALLED BY A LICENSED ELECTRICIAN IN ACCORDANCE WITH ALL
NATIONAL, STATE, LOCAL, AND/OR PROVINCIAL ELECTRICAL CODES.
● DO NOT ATTEMPT TO INSTALL, REPAIR, OR DISASSEMBLE THIS WATER HEATER OR
ANY ELECTRICAL APPLIANCE WITHOUT FIRST SHUTTING OFF ALL POWER TO THE
UNIT DIRECTLY AT THE FUSE OR BREAKER BOX. SERIOUS BODILY INJURY OR DEATH
COULD OCCUR IF THIS WARNING IS NOT HEEDED.
● The Ecosmart electric tankless water heater unit must be installed to independent
double pole breakers as per model specifications below.
● Each Ecosmart model comes supplied with the required wires for installation.
● Breaker size and wire gauge must meet all applicable local, state, provincial, and
national electrical codes for your area – these are only guidelines that will apply to
most installations. In the United States, wires and circuit protection (breakers) must
comply with the U.S. National Electric Code (NEC) and in Canada with the Canadian
National Electric Code (CEC). Please note that the CEC generally requires that all
supply wires and breakers used for domestic hot water heating and hydronic
heating applications be sized to a minimum of 125% of the maximum current rating
of the water heater (see model specifications below for details).
9 / 25
ELECTRICAL CONNECTION