SDS

A&S Power Technology Co., Ltd.
MODEL
A&S 702040
VER
1.0
PAGE
- 5 -/17
SPEC NO.
AS-702040-500-113
File No.
2.0748
DATE
2023-04-18
Rm. 1312 A Block, Weidonglong Business Building, No. 2125 Meilong Rd., Longhua, Shenzhen, China.
Tel：[phone] Fax：[phone]
www.szaspower.com [e-mail]
4 Outline Dimensions and Appearance 外形尺寸和外观
4.1 Outline Dimensions 外形尺寸
See attached drawing for 702040 (Fig.1).
702040 电池的外形示意图请查看（Fig. 1）.
Thickness：7.0mm max.(Measured with weighting 300gf at 25±2℃) .
电芯厚度：最大 7.0mm（测量仪器作用于电池上的压力为 300gf,并在 25±2℃温度下测试）.
Width：20.5mm max.(Measured with weighting 300gf at 25±2℃) .
电芯宽度：最大 20.5mm（测量仪器作用于电池上的压力为 300gf,并在 25±2℃温度下测试）.
Length：40.0mm max.(Measured with weighting 300gf at 25±2℃) .
电芯长度：最大 40.0mm（测量仪器作用于电池上的压力为 300gf,并在 25±2℃温度下测试
The battery pack See attached drawing for 702040 Assembly Drawing (Fig.2).
702040 电池外形示意图请查看(Fig. 2).
4.2 Appearance 外观
There shall be no such defect as scratch, flaw, crack, rust, leakage, which may adversely affect commercial
value of battery.
电池表面干净,无明显划痕和机械损伤,无电解液泄漏,无变形等影响电池价值的外观缺失。
5 Performance 性能
5.1 Standard Test Conditions 标准测试条件
Test should be conducted with new batteries within one month after shipment from our factory and the cells
shall not be cycled more than five times before the test. Unless otherwise defined, test and measurement
shall be done under temperature of 25±2℃ and relative humidity of 45~85%. The test results are not
affected evidently by such conditions of temperature 15~30℃ or humidity 25~85%RH.5.2 Measuring
Instrument or Apparatus.
测试的电池必须是我司出货时间一个月以内的新电池,且电池未进行超过 5 次充放电循环。除非其他特殊要
求，我司产品规格书规定的测试条件为：温度 25±2℃,相对湿度 45~85%。如果已经证明测试结果不受这些
测试条件影响，实验也可以在温度 15-30℃，湿度 25~85%RH，按 5.2 条件进行测试，结果不受影响。
5.2 Measuring Instrument or Apparatus 测量设备
5.2.1 Dimension Measuring Instrument 尺寸测量工具
The dimension measurement shall be implemented by instruments with equal or more precision scale
of 0.01mm.
尺寸测量应使用精度等于或大于 0.01 毫米的仪器进行.