Use and Care Manual

Care and Cleaning
□ To clean the light strip, use a clean, dry, or slightly damp cloth.
□ Do not use any cleaners with chemicals, solvents, or harsh abrasives, as damage
to the strip light may occur.
1
2
3
4
5
6
7
8
9
Description
IR Remote
PIR Motion Receiver
On/Off Button:
[Short Press] Power on and change the color (red, orange, yellow, green, cyan,
blue, purple, white)
[Long Press] Power off
Adjustable Speed & Brightness:
Increase or decrease the 5-level speed of all dynamic modes and
the brightness of all static colors
Motion Sensor Mode:
[Motion Sun Mode] Light turns on when get detected
[Motion Off]
[Motion Moon Mode] Light turns on in darkness only when get detected
Delay Time Options: Light remains on for 120s, 60s or 15s when not get detected
Strip light connection port
USB charging port
Operation(continued)
11
Dynamic Mode Button:
* 1-color ash: red, green, blue, orange, yellow, cyan, purple. Press switch
button(4) to choose color then press dynamic button(3) to achieve ash effect
* 3-color jump: red, green, blue
* 7-color jump: red, green blue, yellow, cyan. purple, white in sequence
* 3-color smooth: red, green, blue
* 7-color fade: red, green blue, yellow, cyan. purple, white in random sequence
10 Charging indicator: red light on when charging; blue light on when fully charged