Item #1009 484 659 Model #LR1321-RGBW-5MSENSER-1024 USE AND CARE GUIDE 16.4 ft RGBW COLOR CHANGING RECHARGEABLE BATTERY STRIP LIGHT WITH MOTION SENSOR Questions, problems, missing parts? Before returning to the store, call EcoSmart Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-800-910-7164 HOMEDEPOT.
Table of Contents Installation ................................. 6 Operation .................................... 8 Care and Cleaning .................... 11 Table Of Contents........................ 2 Safety Information ...................... 2 Warranty ..................................... 4 Pre-Installation ........................... 5 Safety Information PRECAUTIONS Read and understand this entire manual before you attempt to install or operate this product.
Safety Information (continued) □ Increase the separation between the equipment and receiver. □ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. □ Consult the dealer or an experienced radio/TV technician for help. NOTICE: This device complies with Part 15 of the FCC Rules.
Warranty The manufacturer warrants this fixture to be free from defects in materials and workmanship for a period of two (2) years from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service.
Pre-Installation PACKAGE CONTENTS A B D E C F Part Description G Quantity A Strip light 1 B 1000mAh lithium rechargeable controller 1 1 C Iron sheet with adhesive D USB charging cable 1 E Remote control 1 F Mounting Clips 6 G Screws 6 5
Installation 1 Prepare the strip light □ (optional) Shorten the strip light (A) to the desired length by cutting along the black lines with the scissor mark. A 2 Install the strip light □ Ensure that the mounting location is even, clean, and dry. □ Remove the protective film (1) from the back of the strip light (A). □ Press the strip light (A) to the mounting surface and hold in place for a few seconds.
Installation(continued) 3 □ Connect the controller Connect the strip light with the controller according to the arrow indicator A B 4 Install the controller □ Remove the protective film from the back of the iron sheet(C) □ Find a proper place to mount it and press to reinforce it □ After the sheet is fixed for a while, attach the controller(B) to the iron sheet(C) with its back magnet □ Use the mounting clips(F) and screws(G) to further fix the strip light F C G B 7
Operation 1 Remote Operation CAUTION: The remote control included utilizes a 3V CR2025 battery; Do not dispose of batteries in fire as they may explode or leak. Please dispose of used batteries immediately and safely. Only replace with the same battery type. Examine devices and make sure the battery compartment is correctly secured, e.g. that the screw or other mechanical fastener is tightened. Do not use if compartment is not secure.
Operation(continued) Button 1 Description ON: Press to turn on the light 2 OFF: Press to turn off the light 3 Dynamic Mode Button: * 1-color flash: red, green, blue, orange, yellow, cyan, purple. Press switch button(7) to choose color then press mode button(3) to achieve flash effect * 3-color jump: red, green, blue * 7-color jump: red, green blue, yellow, cyan. purple, white in sequence * 3-color smooth: red, green, blue * 7-color fade: red, green blue, yellow, cyan.
Operation(continued) 2 Controller Operation WARNING: Do not try to replace the lithium polymer battery. The rechargeable battery in controller is not replaceable. NOTE: 1. The controller is rechargeable and detachable. Get the controller fully charged before use it. 2.
Operation(continued) Description 1 IR Remote 2 PIR Motion Receiver 3 Dynamic Mode Button: * 1-color flash: red, green, blue, orange, yellow, cyan, purple. Press switch button(4) to choose color then press dynamic button(3) to achieve flash effect * 3-color jump: red, green, blue * 7-color jump: red, green blue, yellow, cyan. purple, white in sequence * 3-color smooth: red, green, blue * 7-color fade: red, green blue, yellow, cyan.
Questions, problems, missing parts? Before returning to the store, call EcoSmart Customer Service 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m.-6p.m., EST, Saturday 1-800-910-7164 HOMEDEPOT.COM/ECOSMART Retain this manual for future use.
