SDS

Product Specification
Model No.: R03 Super Heavy Duty (PVC/Foil Jacket) Document No.: JYSO222
Revision: A0 Page 2 of 6
2008-12-05
Tel: [phone]
Service hotline: [phone]
Website: http://www.sonluk.com
4. Appearance
The battery visually inspected by unaided eye 30cm away from battery. The battery shall be free from dents,
scratch, rust and extruded internal compounds, such as sealing compounds and etc, and serious
displacement of artwork. Appearance defects shall not be observed that may adversely affect actual use or
performance of batteries.
5. Electrical Characteristics
Unless otherwise stated, all measurements are to be performed at a standard environment of
20°C ±2 °C
55 +20 / -40% RH.
All samples are normalized for 8 hours at least at the above environment prior to measurement.
The digital voltmeter (DCM) is with the precision of 1mV (internal resistance not less than 1 Megohm).
The load resistance of the total circuit is accurate within ±0.5% of the specified value.
5.1 Open circuit voltage and closed circuit voltage (Load resistance 3.9Ω, 0.3S)
/
OCV (V)
CCV (V)
Initial
Min
1.60
1.40
5.2 Service output
Load
3.9Ω
5.1Ω
24Ω
75Ω
5.1Ω
50mA
Test mode
24h/d
4m/h
8h/d
15s/m
8h/d
4h/d
1h/d
1h/12h
24h/d
End voltage
0.9V
0.9V
1.0V
0.9V
0.8V
0.9V
Unit
m
m
h
h
m
h
Applications
Reference
Portable
lighting
Remote
control
Radio
Toy
Digital audio
Initial
GB
/
50
4
20
30
3
MAD
36
78
7
24
75
7
s: second m: minute h: hour d: day
Remark: 1) The initial discharge test shall commence within 30 days of manufacture. During stored period, the batteries
shall be stored under 20±2 °C , 55±20%RH conditions.
2) MAD: minimum average duration--our guarantee discharge value.
6. Leakage Resistance
6.1 Over discharge leakage test
Test conditions: 20±2°C, 55+20/-40%RH, 3.9Ω continuous discharge to 0.6V.
Number of test samples: 8 batteries.
Requirement: no leakage, no explosion.