SDS

Product Specification
Model No.: R03 Super Heavy Duty (PVC/Foil Jacket) Document No.: JYSO222
Revision: A0 Page 3 of 6
2008-12-05
Tel: [phone]
Service hotline: [phone]
Website: http://www.sonluk.com
7. Safety Characteristics
7.1 User Drop Test
This test simulates the situation when a battery is accidentally dropped.
Test conditions: undischarged test batteries shall be dropped from a height of 1m onto a concrete
surface. Each test battery shall be dropped six times, twice in each of the three
axes. The test batteries shall be stored for 1h afterwards.
Number of test samples: 5 batteries.
Requirement: no fire or explosion; leakage is allowable.
7.2 Short-circuit explosion-proof characteristics
This test simulates an external short circuit of a battery during daily handling of batteries.
Test conditions: positive and negative terminals of an undischarged battery shall be connected
directly. The circuit shall be completed for 24h or until the battery case
temperature has returned to ambient. The resistance of the inter-connecting
circuitry shall not exceed 0,1Ω.
Number of test samples: 5 batteries.
Requirement: no fire or explosion; leakage is allowable.
8. Expiry Date
3 years
9. Expiry Date Marking
9.1 Unless otherwise specified, each battery will carry a expiry date code (YYYY-MM) for domestic and
expiry date code (MM-YYYY) for export.
10. Packaging Requirements
10.1 The total of heavy metal lead, cadmium, mercury, and hexavalent chromium concentration shall not
exceed 100ppm in packaging materials and printing inks. Ozone depleting substances (ODS) shall not be
used in the manufacturing of any packaging.
10.2 The printing on each cell label is legible and permanent. Others can be resolved through negotiation
based on the requirement of both parties.
10.3 Packaging specification:
Packaging
Inner box/pcs
Carton box/pcs
Carton size
(length*width*height) /mm
Gross
weight/kg
1S/2S/4S
40
1200
240*230*161
9.1
Bulk
500
1000
268*263*132
7.4
10.4 Otherwise packaging for shipment and sales shall conform to the mutually agreed to packaging
specification of the designated customers.