SDS

Product Specification
Model No.: R03 Super Heavy Duty (PVC/Foil Jacket) Document No.: JYSO222
Revision: A0 Page 4 of 6
2008-12-05
Tel: [phone]
Service hotline: [phone]
Website: http://www.sonluk.com
11. Material Safety Data Sheet
MATERIALS
APPROXIMATE
PERCENT OF
TOTAL
WEIGHT (%)
CAS NO.
MATERIALS
APPROXIMATE
PERCENT OF
TOTAL
WEIGHT (%)
CAS NO.
Manganese
Dioxide (MnO
2
)
~28.1
1313-13-9
Acetylene Black
~5.1
1333-86-4
Zinc (Zn)
~30.4
7440-66-6
Fe
~2.34
7439-89-6
Water (H
2
O)
~14.2
7732-18-5
Ni-plating
~0.06
7440-02-0
Zinc Chloride
(ZnCl
2
)
~7.0
7646-85-7
Polyethylene
(PE)
~1.6
9002-88-4
Ammonium
Chloride
(NH
4
Cl)
~1.0
12125-02-9
Carbon
~7.3
/
Paper
~1.7
/
PVC
~1.2
9002-86-2
12. Discharge diagram
13.Storage and stock rotation
13.1 The storage area should be clean, cool, dry, ventilated and weatherproof. For normal storage, the
temperature should be between +10 °C and +25 °C and never exceed +30 °C. Relative humidity is below
60%. Extremes of humidity (over 95% RH and below 40% RH) for sustained periods should be avoided
since they are detrimental to both batteries and packaging.
13.2 Batteries should therefore not be stored next to radiators or boilers, nor in direct sunlight.
13.3 The height to which batteries may be stacked is clearly dependent on the strength of the pack.
As a general guide, this height should not exceed 1,5m for cardboard packs or 3m for wooden cases.