Item #1009 517 432 Model #LR431U-7.2X5IR310M-1024 USE AND CARE GUIDE 32.8 ft RGB COLOR CHANGING STRIP LIGHT Questions, problems, missing parts? Before returning to the store, call EcoSmart Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-800-910-7164 HOMEDEPOT.
Table of Contents Installation ................................. 6 Operation .................................... 8 Care and Cleaning ...................... 9 Table Of Contents........................ 2 Safety Information ...................... 2 Warranty ..................................... 4 Pre-Installation ........................... 5 Safety Information PRECAUTIONS Read and understand this entire manual before you attempt to install or operate this product.
Safety Information (continued) □ Increase the separation between the equipment and receiver. □ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. □ Consult the dealer or an experienced radio/TV technician for help. NOTICE: This device complies with Part 15 of the FCC Rules.
Safety Information (continued) 7. Don't disassemble power supply. Disassembly may result in a risk of electric shock or fire. 8. To reduce the risk of electric shock, unplug the charger from the outlet when not in use. 9. Don't operate unit if it has been subjected to damage in any way. Warranty The manufacturer warrants this fixture to be free from defects in materials and workmanship for a period of two (2) years from date of purchase.
Pre-Installation PACKAGE CONTENTS A B C D Part Description E Quantity A Strip light 1 B Plug-in power supply 1 C Remote control 1 D Mounting clips 11 E Screws 11 5
Installation 1 Prepare the strip light □ (optional) Shorten the strip light (A) to the desired length by cutting along the black lines with the scissor mark. A 2 Install the strip light □ Ensure that the mounting location is even, clean, and dry. □ Remove the protective film (1) from the back of the strip light (A). □ Press the strip light (A) to the mounting surface and hold in place for a few seconds.
Installation(continued) 3 Connect the strip light □ Connect the power supply(B) and the strip light(A) □ Use the Mounting clips(D) and screws(E) to further secure the strip light □ Plug the power supply(B) into the power source B E A D NOTE: Use the screw to secure the installation and avoid strip light falling down when adhesive lose viscosity 7
Operation 1 Remote Operation CAUTION: The remote control included utilizes a 3V CR2025 battery; Do not dispose of batteries in fire as they may explode or leak. Please dispose of used batteries immediately and safely. Only replace with the same battery type. Examine devices and make sure the battery compartment is correctly secured, e.g. that the screw or other mechanical fastener is tightened. Do not use if compartment is not secure.
Operation(continued) Button Description 1 ON: Press to turn on the light 2 OFF: Press to turn off the light 3 Adjustable speed and brightness: Increase or decrease the 10-level speed of all dynamic modes and the brightness of all static colors 4 Static (solid) color: red, green, blue 5 Static (solid) color: white 6 Static(solid) color: 12 mixed colors 7 3 color flash 8 7 color strobe 9 3 color fade 10 7 color smooth Care and Cleaning □ To clean the light strip, use a clean, dry, or sl
Questions, problems, missing parts? Before returning to the store, call EcoSmart Customer Service 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m.-6p.m., EST, Saturday 1-800-910-7164 HOMEDEPOT.COM/ECOSMART Retain this manual for future use.
