Radion TM LED LIGHTING Setup Guide
Inside the Box Inside the Box.....................................1 Installing Your Radion........................2 Basic Mode.......................................4 RADION LED LIGHTING SYSTEM ReefLink with Radion........................5 Three control buttons, Raise, Cycle and Lower make the Radion simple to use. EcoSmart Live....................................6 See pages 4 and 8 for more information. Basic Mode Controls.........................8 EcoSmart Live Override Controls......
Installing Your Radion 3. TM Individual lighting needs will vary depending on your tank inhabitants. Here is a rough guide to get you started: 1. MOUNTING THE POWER SUPPLY (OPTIONAL) XR15 (XR30) Mount your power supply where it won’t get wet. Include a “drip loop” - (XR15) a tied loop of cord hanging down below the level of the electrical outlet. That way, if water happens to run down the cord from the tank, it will 2.
Basic Mode Your Radion operates in Basic Mode out of the box. In Basic mode, the Radion will remain on unless manually powered off. Current settings will remain even after powering off. Setting Up a Radion with ReefLink* RADION CONTROLS 1. If you already have a ReefLink and EcoSmart Live account, simply power on your Radion and add the new light through EcoSmart Live. 2. If you just purchased a ReefLink and Radion light(s), set up the ReefLink first.
EcoSmart Live without ReefLink TM Connection Manager requires a recent version of JavaScript. If you receive an error upon trying to run the Connection Manager, download and install the most recent version of JavaScript. EcoSmart Live is EcoTech Marine’s configuration platform that enables you to set up your Radion(s) directly through a web browser on a PC or Mac.
BASIC MODE CONTROLS Result Power the Radion ON or OFF Cycle through the Radion’s different preset color settings Increase light intensity by 1% 8 Buttons ECOSMART LIVE OVERRIDE CONTROLS Action HOLD all three buttons. PRESS “Cycle” button. Buttons Action One-Day Power Off Once your light has been programmed, this will initiate a one-day power off. This is to help newly introduced fish acclimate. The Radion will turn back on when the next day cycle begins. HOLD “Raise,” “Cycle” and “Lower” buttons.
Troubleshooting Issue Below are some common troubleshooting situations and their most common solutions. If you have issues that you cannot solve, please contact EcoTech Marine Customer Service. Online: ecotechmarine.com/support Radion will not connect to the Connection Manager. Resolution • Make sure the USB cord is securely plugged into the Radion and computer. • Ensure that only one Radion is connected via USB. • Restart the computer.
Troubleshooting Issue Cannot connect or not working as expected with EcoSmart Live. Connected VorTech pumps will not go into Night Mode when Radion goes into Night Mode. Resolution • Make sure your internet connection is working. • Make sure that you have used the correct username and password to log into EcoSmart Live. • Make sure that you are using a compatible Web Browser - Google Chrome or Safari. • Refresh the web browser page.
Limited Warranty Indicator Lights Meaning Remedy Blinking white Radion is powered only through USB. • Unplug the connected Radion from the computer. • Connect the Radion to power. • Then connect the Radion to the computer using the USB cord. Red & white Firmware update in progress, or no firmware is installed. Radion overheating warning. Red & green Driver over temperature error. Any other color Hardware issue. • Wait for software update to complete.
Regulatory Information • DO NOT look directly at LEDs regardless of intensity. • This product carries an ingress protection rating of IPX0 and must not be immersed in water. • Danger: To avoid possible electrical shock, special care should be taken since water is employed in the use of aquarium equipment. • DO NOT attempt repairs yourself; return the appliance to the manufacturer for service or discard. • DO NOT immerse in water.
® 050114