Setup guide

98
Decrease light intensity rapidly
Increase light intensity rapidly
Decrease light intensity by 1%
Increase light intensity by 1%
Cycle through the Radion’s different
preset color settings
Power the Radion ON or OFF
HOLD all three buttons.
PRESS “Raise” button.
PRESS “Lower” button.
HOLD “Raise” button.
HOLD “Lower” button.
PRESS “Cycle” button.
Result
Buttons
Action
BASIC MODE CONTROLS
Feed Mode
Initiates feed mode in any wireless-
enabled EcoSmart VorTech Pumps
within range. This will not affect
light output.
HOLD “Raise” and “Lower” buttons.
Result Buttons Action
One-Day Power Off
Once your light has been programmed, this
will initiate a one-day power off. This is to help
newly introduced fish acclimate. The Radion will
turn back on when the next day cycle begins.
Override - Day
When in night mode, this button combination
will toggle day mode. Your Radion will stay in
day mode until the override period has elapsed,
or until you press the button combo again to
return to night mode.
When in override mode, EcoSmart Live programming is put on hold. The control buttons will function as though the light
were in Basic Mode. After the override period has elapsed, the Radion will return to EcoSmart Live Mode.
ECOSMART LIVE OVERRIDE CONTROLS
HOLD “Raise,” “Cycle” and
“Lower” buttons.
HOLD “Cycle” and “Raise” buttons.
HOLD “Cycle” and “Lower” buttons
Override - Night
When in day mode, this button combination will
toggle night mode. Your Radion will stay in night
mode until the override period has elapsed, or
until you press the button combo again to return
to day mode.