Use and Care Guide
15
EN
3. Operating and Programming
Pause DEEBOT. Open the robot’s Top
Cover. Move the Power Switch to the OFF
position to power OFF. “I”=power ON;
“O”=power OFF.
7
Power OFF
*
When DEEBOT is not working, it is suggested
to keep it powered ON and charging.
This is the most commonly used mode. In
AUTO Cleaning Mode, DEEBOT cleans in a
back and forth straight-line pattern.
*
For models with app-connectivity, various functions can be performed using the ECOVACS
App.
AUTO Cleaning Mode
1
3.3 Cleaning Mode Selection
DEEBOT has several Cleaning Modes to choose from to effectively clean different oors. Cleaning
Modes are selected using the or ECOVACS App.
This mode is applicable for areas of highly concentrated dirt or dust. In Spot Cleaning Mode,
DEEBOT focuses on selected areas to clean. Specic areas on the map can be selected to be
cleaned with Spot Cleaning Mode using ECOVACS App.
Spot Cleaning Mode
2
Area Cleaning Mode
3
After DEEBOT has scanned and mapped the environment, specic areas on the map can be
selected to be cleaned with Area Cleaning Mode using ECOVACS App.