Operating Guide

11
EN
3. Operating and Programming
WINBOT can clean horizontally mounted glass but only when using the
Direction Control Buttons on the Remote Control. Keep the Safety Pod
rmly attached to the glass.
WINBOT is intended to be used for maintenance cleaning on common windows. The product is not designed to replace heavy-duty or cleaning
windows with heavy dust for the rst time.
Please refer to the glass manufacturer's care and cleaning instructions before using WINBOT on glass with an uneven surface, such as frosted,
textured, patterned, or coated glass. The manufacturer cannot be responsible for damage due to improper use on these surfaces.
Do not use WINBOT upside down.
If the window is covered with dirt, clean a small area on the glass before
use and place WINBOT there.
WINBOT can clean glass mounted at an angle but may not operate
normally; in such a case, a person should be in the vicinity to assist
should there be a problem.