Operating Guide

3. Operating and Programming

Make sure Safety Pod is attached at least 1.6 meters above

ground, and the robot is suggested to be placed within an

1-meter radius of Safety Pod.

Step

Note: WINBOT has successfully attached to the window when the

WINBOT Status Indicator Light glows a continuous BLUE and beeps.

Note: Please ensure there is a 15cm (5.9”) clearance between the

glass and obstacles in the room like curtains or furniture.

Note: The Fan does not start until Safety Pod is rmly pressed on the glass

and keep it away from hair or any debris..

Warning: If WINBOT is being used to clean an inside or outside

window, ALWAYS press Safety Pod FIRMLY on the INSIDE window.

Make sure the Safety Pod is attached and securely in place.

The length of the Safety Pod line is 2.5m.

It is suggested to place the Safety Pod on the top corner of the window

to ensure 1.6m above ground if the window is smaller.

Step