Operating Guide

3. Operating and Programming

Note: Remove WINBOT from the window after the fan stops working.

Polish away any marks left on the glass from the robot’s removal with a

dry cloth. If you want to stop the WINBOT during cleaning, please rst

press Start/Pause Button once to pause WINBOT and then press and

hold this button for more than 5 seconds to remove WINBOT.

When WINBOT completes its cleaning cycle, it returns to the place it

started and beeps.

Stop

Step

Note: If WINBOT has a problem and the indicator Light ashes RED,

it can be reset by pressing the RESET Button on the Remote Control.

See “Troubleshooting” for details.

Step