EN Instruction Manual JA 1
Congratulations on the purchase of your ECOVACS ROBOTICS DEEBOT! We hope it brings you many years of satisfaction. We trust the purchase of your new robot will help keep your home clean and provide you more quality time to do other things. Live Smart. Enjoy Life. Should you encounter situations that have not been properly addressed in this Instruction Manual, please contact our Customer Service Center where a technician can address your specific problem or question.
Contents 1. Important Safety Instructions.......................................................................4 2. Package Contents and Technical Specifications.......................................6 2.1 Package Contents.....................................................................................6 2.2 Specifications............................................................................................6 2.3 Product Diagram.......................................................................
1. Important Safety Instructions When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. SAVE THESE INSTRUCTIONS 1. This Appliance is not intended to be used by children under 8 or anyone lacking knowledge on proper use. Supervision may be necessary. Do not allow children to sit on or play with the Appliance. 2. Clear the area to be cleaned.
1. Important Safety Instructions 22. Turn OFF the power switch before cleaning or maintaining the Appliance. 23. The plug must be removed from the receptacle before cleaning or maintaining the Charging Dock. 24. Remove the Appliance from the Charging Dock, and turn OFF the power switch to the Appliance before removing the battery for disposal of the Appliance. 25. The battery must be removed and discarded according to local laws and regulations before disposal of the Appliance. 26.
2. Package Contents and Technical Specifications 2.1 Package Contents JA EN 取扱説明書 Instruction Manual Robot Charging Dock Remote Control with Batteries Instruction Manual (4) Side Brushes Direct Suction Option Washable/Reusable Microfiber Cleaning Cloth Cleaning Cloth Plate Multi-Function Cleaning Tool (10) Disposable Dry Cleaning Cloths (10) Disposable Wet Cleaning Cloths 2.
2. Package Contents and Technical Specifications 2.3 Product Diagram Robot 4 5 15 12 1 8 9 2 7 10 6 14 3 11 13 1. Top Cover 2. Control Panel 3. Anti-Collision Sensors 4. Anti-Drop Sensors 5. Side Brushes 6. Battery Cover 7. Cleaning Cloth Plate Slots 8. Universal Wheel 9. Main Brush Option 10. Driving Wheels 11. Bottom Power Switch 12. Dust Sensors 13. Infrared Receiver for Remote Control 14. Battery Cover Screws 15. Charging Contacts Control Panel D83 1 1. Spot Cleaning Mode Button 2.
2. Package Contents and Technical Specifications Charging Dock 1. Infrared Signal Generator 2. Charging Dock Pins 1 2 Remote Control 1 2 6 9 3 4 5 7 8 10 1. LCD Screen 2. Return to Charger Mode Button 3. AUTO Mode Button 4. Direction Control Buttons 5. START/PAUSE Button 6. Time Scheduling Button 7. Set Current Time Button 8. Spot Cleaning Mode Button 9. Intensive Cleaning Mode Button 10.Edge Cleaning Mode Button Dust Bin 1 2 3 4 5 8 EN 1. Dust Bin Handle 2. High Efficiency Filter 3.
3. Operating and Programming 3.1 Notes Before Cleaning Before Operating DEEBOT, take a few moments to survey the area to be cleaned and remove any obstacles. Remove power cords and small objects from the floor that could entangle the product. The product is not suitable for use on long-pile carpet. Before using the product near an area rug or on a short-pile area rug with tasseled edges, please fold area rug edges under themselves.
3. Operating and Programming 3.2 Quick Start 1 Charging Dock Placement Place the Charging Dock on a level floor surface against the wall with the base perpendicular to the ground. Keep the immediate area 1.5m (5’) in front of the charger and 0.5m (1.6’) on both sides of the charger clear of objects and reflective surfaces. Plug the Charging Dock in. 2 Install Side Brushes Attach Side Brushes to the bottom of DEEBOT 8 by pressing a brush into each slot with the matching color until it clicks.
3. Operating and Programming 4 Charge DEEBOT 8 Place DEEBOT 8 on the Charging Dock making sure the Charging Contacts on DEEBOT 8 and the Charging Dock Pins make a connection. Charge DEEBOT 8 for at least 12 hours before the first use. * The START/PAUSE Button on the robot’s Control Panel blinks when DEEBOT 8 is charging and stays on when DEEBOT 8 is fully charged. * If DEEBOT 8’s START/PAUSE Button Blinks RED while charging, move the Bottom Power Switch to the ON position.
3. Operating and Programming 6 Start Press the START/PAUSE Button on the robot’s Control Panel, or the AUTO Mode Button on the Remote Control. DEEBOT 8 starts to work immediately in AUTO Cleaning Mode. * To choose another Cleaning Mode, please refer to section 3.3 Cleaning Mode Selection for details. 7 Pause Pause DEEBOT 8 by pressing the START/PAUSE Button on the robot’s Control Panel or on the Remote Control.
3. Operating and Programming 3.3 Cleaning Mode Selection DEEBOT 8 has several Cleaning Modes for you to choose from to effectively clean different floors. Cleaning Modes are selected using the robot’s Control Panel Buttons, or using the Remote Control. * To switch Cleaning Modes using the robot’s Control Panel Buttons, Pause DEEBOT 8 first, and then press the desired Cleaning Mode Button on the Control Panel. * To switch Cleaning Modes using the Remote Control, press the desired Cleaning Mode Button.
3. Operating and Programming Return to Charger Mode When battery power gets low, DEEBOT 8 automatically switches to Return to Charger Mode and returns to the Charging Dock to recharge itself. DEEBOT 8 can also be sent back to the Charging Dock at any time by Pausing DEEBOT 8, then pressing the Return to Charger Mode Button on the robot’s Control Panel, or pressing the Return to Charger Mode Button on the Remote Control. 3.4 Programming the Robot DEEBOT 8 has a Time Scheduling function.
3. Operating and Programming Press the up and down Direction Control Buttons to adjust “hour” and “minute” number. Press the left and right Direction Control Buttons to switch between hour, minute and AM/PM. Press button on the Remote Control to confirm and save the current time of day. 2 Schedule the Cleaning Time Press button on the Remote Control until flashes and illuminates on the Remote Control Screen.
3. Operating and Programming Press the up and down Direction Control Buttons to adjust “hour” and “minute” number. Press the left and right Direction Control Buttons to switch between hour, minute and AM/PM. Press button to confirm and save the scheduled cleaning time. DEEBOT 8 automatically cleans at the scheduled cleaning time every day. 3 Cancel Scheduled Cleaning Time Press and hold button until disappears from the Remote Control’s screen. The scheduled cleaning time is cancelled.
3. Operating and Programming 3.5 Choosing a Suction Option D83 has 2 interchangeable suction options for your convenience. Main Brush Option: The best choice for deep cleaning with a combination of the Main Brush and strong suction. The Main Brush Option comes pre-installed in DEEBOT 8. Direct Suction Option: The best choice for daily cleaning with the Main Brush removed for direct suction. This Suction Option is specifically designed to pick up hair without tangling.
3. Operating and Programming 2 Install the Main Brush Option Turn the robot over. Push both yellow buttons below the Direct Suction Option at the same time, and remove Direct Suction Option. Insert the Main Brush into the bottom of the robot. Line up the Main Brush Cover tabs with the slots on the bottom of the robot. Press until the component clicks into place.
4. Maintenance Before performing cleaning and maintenance on DEEBOT 8, move the Bottom Power Switch to the “O” position and unplug the Charging Dock. 4.1 Dust Bin and Filters Cleaning the Dust Bin and the Filters Open DEEBOT 8’s Top Cover and remove the Dust Bin. Open the Dust Bin Cover and empty the Dust Bin. Remove the filters. Pat the High Efficiency Filter clean. Do not rinse the High Efficiency Filter under water. Wash and Dry Rinse the Dust Bin and Filter Net under running water.
4. Maintenance 4.2 Cleaning Cloth If the mopping feature was used, remove the Cleaning Cloth Plate from DEEBOT 8 and remove the Cleaning Cloth. Wash the Washable/Reusable Cleaning Cloth by hand or in the washing machine, and lay flat to dry. Throw Disposable Cleaning Cloths away. 4.3 Main Brush, Direct Suction Option and Side Brushes * A Multi-Function Cleaning Tool is provided for easy maintenance. Handle with care, this cleaning tool has sharp edges. Cleaning the Main Brush Turn the robot over.
4. Maintenance Cleaning the Side Brushes Remove the Side Brushes. Wipe the Side Brushes and their slots with a dry cloth. 4.4 Other Components Clean the Universal Wheel by removing any hair tangled around it. Wipe the Anti-Drop Sensors with the brush or the felt side of the Multi-Function Cleaning Tool to maintain their effectiveness. Wipe the Dust Sensors with the brush or the felt side of the Multi-Function Cleaning Tool to maintain their effectiveness.
5. Troubleshooting Please use this chart to troubleshoot common problems using DEEBOT 8. NO. 1 2 3 22 EN Malfunction DEEBOT 8 will not charge. DEEBOT 8 gets into trouble while working and stops. DEEBOT 8 returns to the Charging Dock before it finishes cleaning. Possible Causes Solutions The Bottom Power Switch on the bottom of DEEBOT 8 is not turned ON. Turn the Bottom Power Switch to the ON position. DEEBOT 8 has not made a connection with the Charging Dock.
5. Troubleshooting NO. 4 5 Malfunction DEEBOT 8 will not clean automatically at scheduled time. Remote Control failure (effective control range of Remote Control is 5m (16’)). Possible Causes Solutions Time Scheduling function is cancelled. Set Time Scheduling function as described in section 3.4. The Bottom Power Switch on the bottom of the robot is OFF. Turn the Bottom Power Switch to the ON position. The robot’s battery is low.
DEEBOT 8-034-IM2014R00
