EN Instruction Manual
Congratulations on the purchase of your ECOVACS ROBOTICS DEEBOT! We hope it brings you many years of satisfaction. We trust the purchase of your new robot will help keep your home clean and provide you with more quality time to do other things. Before you go any further, please register your product on the ECOVACS ROBOTICS website at www.ecovacsrobotics.com/registration/. We also suggest you record your model number, serial number, date of purchase and attach your receipt to this page for safekeeping.
Contents 1. Important Safety Instructions.................................................................................2 2. Package Contents and Technical Specifications.............................................4 2.1 Package Contents..................................................................................................4 2.2 Specifications..........................................................................................................4 2.3 Product Diagram............................
1. Important Safety Instructions When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. SAVE THESE INSTRUCTIONS 1. This Appliance is not intended to be used by children under 8 or anyone lacking knowledge on proper use. Supervision may be necessary. Do not allow children to sit on or play with the Appliance. 2. Clear the area to be cleaned.
1. Important Safety Instructions 22. Turn OFF the power switch before cleaning or maintaining the Appliance. 23. The plug must be removed from the receptacle before cleaning or maintaining the Charging Dock. 24. Remove the Appliance from the Charging Dock, and turn OFF the power switch to the Appliance before removing the battery for disposal of the Appliance. 25. The battery must be removed and discarded according to local laws and regulations before disposal of the Appliance. 26.
2. Package Contents and Technical Specifications 2.1 Package Contents EN FR-C A ES-MEX Instruction Manual Manuel de l'utilisateur Manual de Instrucciones Robot Charging Dock Instruction Manual Remote Control with Batteries (4) Side Brushes Cleaning Cloth Plate Washable/Reusable Microfiber Cleaning Cloth Battery Pack 2.
2. Package Contents and Technical Specifications 2.3 Product Diagram Robot 6 7 8 1 2 3 9 4 10 11 5 12 13 14 1. Bumper Strip 2. Anti-Collision Sensors 3. AUTO Mode Button 4. Top Cover 5. Dust Bin 6. Universal Wheel 7. Side Brushes 8. Charging Contacts 9. Battery Pack 10. Anti-Drop Sensors 11. Suction Intake 12. Driving Wheels 13. Cleaning Cloth Plate Slots 14. Infrared Receiver for Remote Control Charging Dock 1 1. Infrared Signal Generator 2.
2. Package Contents and Technical Specifications Remote Control 8 1 2 3 4 5 6 7 1. AUTO Mode Button 2. Edge Cleaning Mode Button 3. Spot Cleaning Mode Button 4. Intelligent Scheduling Button 5. Return to Charger Mode Button 6. Direction Control Buttons 7. Pause Button 8. Infrared Emitter Dust Bin 1 4 2 5 6 3 1. Dust Bin Handle 2. Dust Bin Lock 3. Filter Net 6 EN 4. Sponge Filter 5. High Efficiency Filter 6.
3. Operating and Programming 3.1 Notes Before Cleaning Before Operating DEEBOT, take a few moments to survey the area to be cleaned and remove any obstacles. Remove power cords and small objects from the floor that could entangle the product. The product is not suitable for use on carpet. Before using DEEBOT 4 near an area rug, please fold area rug edges under themselves. Please be aware that the robot needs at least a 9 cm (3.5") clearance to clean under furniture without complications.
3. Operating and Programming 3.2 Quick Start 1 Charging Dock Placement Place the Charging Dock on a level floor surface against the wall with the base perpendicular to the ground. Keep the immediate area 1.5m (5') in front of the charger and 0.5m (1.6') on both sides of the charger clear of objects and reflective surfaces. 1.6 1.6 Plug the Charging Dock in. 2 Install Battery Insert the Battery Pack into the battery slot on the bottom of DEEBOT 4. Press it until it is fully locked in place.
3. Operating and Programming 4 Power ON Press and hold the AUTO Mode Button on DEEBOT 4 for 3 seconds. DEEBOT 4 is powered ON when the AUTO Mode Button illuminates. ON 5 Charge DEEBOT 4 Place DEEBOT 4 on the Charging Dock making sure the Charging Contacts on DEEBOT 4 and the Charging Dock Pins make a connection. * AUTO Mode Button blinks RED, BLUE and GREEN when DEEBOT 4 is charging. DEEBOT 4 is fully charged when the AUTO mode glows a continuous GREEN.
3. Operating and Programming 7 Start Press the AUTO Mode Button on DEEBOT 4 or on the Remote Control. DEEBOT 4 starts to work immediately in AUTO Cleaning Mode. * To choose another Cleaning Mode, please refer to section 3.3 Cleaning Mode Selection for details. 8 Pause Pause DEEBOT 4 by pressing the AUTO Mode Button or the Pause Button on the Remote Control. * DEEBOT 4 can be directed to move forward, backward, left and right using the Direction Control Buttons on the Remote Control when it is Paused.
3. Operating and Programming 3.3 Cleaning Mode Selection DEEBOT 4 has several Cleaning Modes to choose from to effectively clean different floors. Cleaning Modes are selected using the Remote Control. * Pause DEEBOT 4 before switching Cleaning Modes. 1 AUTO Cleaning Mode This is the most commonly used mode. In AUTO Cleaning Mode, DEEBOT 4 cleans in a straight line and changes direction when it meets an obstacle. 3 Edge Cleaning Mode This mode is good for cleaning the edges and corners of a room.
3. Operating and Programming 3.4 Intelligent Scheduling DEEBOT 4 has an Intelligent Scheduling function. DEEBOT 4 can be scheduled to clean once per day at the same time, even if nobody is at home. 1 Set Intelligent Scheduling Set Intelligent Scheduling using one of the methods below. Intelligent Scheduling is set successfully when the AUTO Mode Button on the robot glows a continuous BLUE. Press on the Remote Control to set the current time as the scheduled cleaning time.
4. Maintenance * Before performing cleaning and maintenance, power OFF DEEBOT 4 and unplug the Charging Dock. 4.1 Dust Bin and Filters 1 Open DEEBOT 4’s Top Cover and remove the Dust Bin. Open the Dust Bin Cover and empty the Dust Bin. 2 Re m o v e t h e f i l t e r s . P a t t h e H i g h Efficiency Filter clean. Do not rinse the High Efficiency Filter under water. 3 Rinse the Dust Bin, Sponge Filter and Filter Net under running water. 4 Dry the Dust Bin and filters completely before reinstalling.
4. Maintenance 4.2 Cleaning Cloth Remove the Cleaning Cloth Plate from DEEBOT 4 and remove the Cleaning Cloth. Wash and dry the Cleaning Cloth. 4.3 Suction Intake and Side Brushes Wipe the Suction Intake with a dry cloth. 14 EN Remove the Side Brushes. Wipe the Side Brushes and their slots with a dry cloth.
4. Maintenance 4.4 Other Components Clean the Universal Wheel by removing any hair tangled around it. Wipe the Anti-Drop Sensors with a dry cloth to maintain their effectiveness. Wipe the Charging Contacts and Charging Dock Pins with a dry cloth.
5. Troubleshooting Please use this chart to troubleshoot common problems using DEEBOT 4. No. Possible Causes Solutions DEEBOT 4 is not powered ON. Press and hold AUTO Mode Button for 3 seconds to power ON DEEBOT 4 then charge. DEEBOT 4 has not made a connection with the Charging Dock. Be sure that DEEBOT 4 has made a connection with the Charging Dock Pins. You may move the robot manually to make the connection if necessary.
5. Troubleshooting No. 5 Malfunction Remote Control failure (effective control range of Remote Control is 5m (16’)). Possible Causes Solutions The batteries in the Remote Control need to be replaced. Replace with new batteries making sure they are installed correctly. DEEBOT 4 is powered OFF or DEEBOT 4’s battery is low. Make sure DEEBOT 4 is powered ON and fully charged.