Robot Vacuum Cleaner D58 User Guide Downloaded From Vacuum-Manual.
Downloaded From Vacuum-Manual.
Thanks for purchasing patented Robot Vacuum Cleaner products. Hope you can enjoy it ! Thanks again for your choice! Downloaded From Vacuum-Manual.
Content 1. Safety Instruction........................... 3 Set Frequency and Cancel Timing........17 User Guide............................ .. . ..... ...... 3 9. Remote Control................... .... .............17 Power Supply for the Product........ ... ...... 3 Battery Placement..............................17 The Spectrum of Product Use........ .. ...... 4 Use of Remote Control ........................18 Notes before Cleaning........ ... ............... 5 10.Virtual Wall.. ... ...... .......
Enjoy Smarter Life! 1.Safety Instruction War ning： Where there is a drop off in the cleaning area due to a step or stairs and they are not carpeted, you should operate the unit to see that the unit can detect the step without falling over the edge. It may become necessary to place a physical barrier at the edge to keep the unit from falling over the drop but make sure the physical barrier is high enough so that you or a family member will not trip on the barrier and cause themselves injury.
The Spectrum of the Product Use ● This robot is applicable to domestic sweeping, including wooden floor, rubber floor, ceramic tile, linoleum and medium or short-haired carpet however, it is inapplicable to long-haired carpet. ● It can not be used for the floor as below: ---- Have water on the surface (including flammable liquids), such as wet floor. ---- Inside toilet, shower room or other humid situation.
Enjoy Smarter Life! Notes before Cleaning ● Take extra care of the robot when the first it works. Please remove the obstacles when it is beyond the robot. Try to avoid the situation that the robot stops working. ● Make precautions to solve the problem which may make the cleaning in trouble, such as: ---- Keep the easily knock over objects in a safe place. ---- Permian the edge of the carpet. ---- The hanging table cloth and curtain should not touch the ground.
● Take good care of the product and keep it beyond child and people who can not judge danger nearby. Extra attention should be paid when it starts working. ● You should get the person inside the room know that the machine is working, in order to avoid man-made damage like tripping. ● Do not take robot as toy. Carefully attention should be paid when child or pet is around. ● The plastic package may bring danger of asphyxia keep away from child.
Enjoy Smarter Life! 2.Cont ent Host spot edge return intensive Charging block Virtual wall auto Robot Vacuum Cleaner Battery for virtual wall D58 User Guide Remote control Side brush User guide Roll brush clean-up gadget Border Tape Battery for remote control Magnetic adding tool 7 Downloaded From Vacuum-Manual.
technique parameter The host Working voltage The charging block Rated power Speed In-put voltage DC14.4V rated out-put voltage 30W Noise 50Hz 0.7L rated power 30W ≤62dB rated out-put currency 0.8A Charging duration About 3 hours Duration upon full battery 60 minutes About 60 minutes Max Coverage upon full battery 120-150M Size DC17.5V rated frequency 0.
Enjoy Smarter Life! 3.
LCD and Control Panel 19 18 17 20 21 1 16 2 mode 3 15 4 14 9 11 13 10 7 8 12 5 6 1. Power 8. Intensive cleaning mode 15. Appointment time setting 20. Tip for trapped 2. Model selection 9. Automatic cleaning mode 16. Time adjust button 3. On/Pause 21. Tip for driving wheel suspend 10. Operation status 4. Pause status 11. Cancel timing cleaning 5. Fixed point cleaning mode 12. Keep timing cleaning 18. Battery display 6. Go back charging mode 13.
Enjoy Smarter Life! Tangle the power cord on the pothook and do not scatter it besides the block or hold it under the base, in case that robot would get impeded when it turns back. 0. 5 0. 5 There should not be any object at least 1.5 meter in front of the charging m m block. Besides, anything with strong reflector is not supposed to stay ahead of the infrared receiver. For example, ground glass, smooth ceramic vase and 1.5 m so on. Other wise, the machine shall not detect the charging block.
5.Power On/ Pause/Power off Get power supply and power on ● Turn on the power switch on the bottom firstly. ● Press the key on host and get power supply. There would be a short music tip and at the same time LCD lights for roughly 2 second and goes off. mode ● Then press key to start robot . mode Pause ● Press key, it can pause the operation of robot and keep it stay where it is. mode Tips: On the status of pause, you can reset the cleaning mode, then press key again, it will go back to work.
Enjoy Smarter Life! Tips : Put the robot on the charging block and keep it charging after finishing house cleaning. 10 Do not keep the robot on pause status for long time, because under pause, the full charged battery can only last for around 20 hours. We suggest you to turn it off when you do not want it to work. 6.
Border Cleaning Mode Route description: under this mode, once the robot detects objects, it would run along it, like wall, to clean until it meets obstacle and change the former route. Under this status, robot helps to remove the corner of wall, table, sofa and bed where it is beyond the mode of automatic cleaning. The operation of this mode takes around 25 minutes and then robot goes back to charging block by itself.
Enjoy Smarter Life! 7 . Automatically Charging ？ ● When it finishes cleaning or there is low battery, it would seek charger in same route as automatic cleaning.To make it easy for robot to search for charging block, you need to put the block back to the wall and make sure there is no obstacle within 1.5 meters ahead of the infrared receiver. Check carefully whether there is strong reflector in front of the charger, such as ground glass, smooth ceramic vase and so on.
Second time setting mode 1. Now, the label high light, and the number with time setting is flashing. 2. Set hourandminute via and , each time press will increase one hour or minute. While decrease one hour and minute for . mode Tips : 3. Press again, and then go to current time setting. For example: Selection scope: hour is between 0 and 23, minute is between 0-59. Under normal circumstance, time display on LCD shows current time.
Enjoy Smarter Life! Note When power is off, robot will not start work on appointment time .If you have already set appointment time cleaning, please turn on the robot and keep it on standby status， even though it is not operating. Try to make it stay at the charger and check whether it is connected. Make sure the socket is connected to power supply. Or else, robot will fail to work on appointment time under standby status because of running out of battery.
Use of Remote Control spot edge You can control the robot via remote control. Drive robot to appointed area via using direction control button. Choose certain working mode according to different auto Automatic Cleaning Mode/ return Cleaning Mode/ intensive direction control key Border Cleaning Mode/ Intensive cleaning mode / Fixed Point Go Back Charging Mode Pause key: temporarily stop current operating and make it stay where it is.
Enjoy Smarter Life! Note: When you use virtual wall, please face marked ECOVACS to the block area you expect. Put virtual wall outside of the room you want to block to get best effect. The system would cancel virtual wall after it is set for two hours in order to save battery. As a result, every time the robot start new task and there needs to use virtual wall, please do and check whether the switch on virtual wall is on and there is indicator.
11. Border Tape Border Tape Instruction Border Tape is used to confine the cleaning area. Deebot will not proceed beyond the border, allowing Deebot to clean a designated area. 1 Clean the area where you plan to paste the Border Tape with a dry cloth. Unroll the Border Tape and cut the length according to your needs. Paste the Border Tape on the floor after tearing off the white layer on one side. Rub the Border Tape with Border Enhancement Tool. Note: 1. Do not paste the Border Tape within a 1.
Enjoy Smarter Life! 12. Day-to-day Storage You should keep robot stay at charger even though it finishes charging and cleaning task, because it will change to small currency to supplement charging. Charge the robot until full battery and put it back to the package if you do not need to use it for long time(at least over three months). Keep the package in dry surroundings to avoid sunshine or humidity. 13. Maintenance The Host Cleaning Turn off the power before cleaning the host.
Hold the handle of 21 dust box and lift it to 31 take out. In order to avoid dust leaking, lift the suction up when you take out dust box. Please mind your speed doing this step. Match the bottom with 41 trash can and swing 51 If you notice that there is too much dust on dust box gently. You can sponge filter, you can mildly beating it along open the lock and take the edge of the can to off the cover. get the dust out. Pour out the dust on 61 sponge filter.
Enjoy Smarter Life! Sponge Filter Replacement 1. Open the cover of the Deebot, take out the dust box. 2. Push aside the lock catch of the dust box ,then open the dust box and clean it. 3. Extract the axle of the dust box’s cover. 4. Replace the sponge filter and fix the cover ,then put it back into Deebot. Main brush cleaning Tips: Clean the main brush after it has operated for 4 or 5 recycles. 1 11 Undo the screw fixed on the main brush. 2 Take off the frame of main brush.
Side brush cleaning Side brush is a kind of easy wear part. We suggest you to check it every time it takes cleaning task. Please change it if necessary. Note： The host will alarm when the side brush tangles and it will show on LCD as . Replace sidebrush Please replace the side brush when it is destroyed. Please remove the screws, and take out the side brush. Please push the new side brush into the correct position. Tight the screws.
Enjoy Smarter Life! Dust sensor cleaning The dust sensor is located at the front of dust entrance. It is able to detect the concentration of dust so that it can choose efficient mode to work. We suggest you to clean dust sensor once you clean dust box to improve work efficiency. 1. Turn off power. 2. Take out dust box and clean it. 14. Alarm Function Icon Cause of failure 1. There is too much dust in dust box. 2. There is too much dust on dust sensor. 1. Dust box is not fixed into host. 2.
15. Common Failure No. Problem Solution Turn off the power. 1. Check if there is dust on up-ground height 1 Robot keeps proceeding or moving backward once power is on. sensor, which cause robot to make wrong signal. Use half dry cloth to clean it. 2. Buffer collision is out of control. Put your hand at left, middle and right in turn to see if it can rebound by itself. Robot may fall in trouble when it is working.
Enjoy Smarter Life! Turn off the power supply, and then take out of dust box. After removing the garbage, overturn the robot. 5 There is much noise when the robot works. 1. Check whether the suction of main brush is blocked. 2. Examine and clean the main brush(at both ends). 3. Examine and clean the side brush. If the failure is still there after operating according to the above procedure, Please contact out after-sales service. 16.Other Problems 1.
10. Why does robot fail to start cleaning on appointment time? Answer: a.Confirm whether there is much remaining battery. Appointment timing is not applicable when robot is returning to charge after operating cleaning. b. Check if robot is under standby status. 11. Why robot is not charging as it is put in the charger? The charging indicator does not light as well. Answer: a. Examine whether the battery at the bottom is installed in place, if cover screw is loose, you need to fasten it. b.
Enjoy Smarter Life! 21 . How does main brush avoid being tangled by power cord? Answer: Robot is probably get tangled by the wire scattered on the floor when it is operating. At that time, robot will try to turn back to get rid of it, and it will make alarm sound when it fails after trying several times. If the procedures above still do not make it work, please contact our after-sales service. 22 .
Enjoy smar ter life! D58-000IM201101 Downloaded From Vacuum-Manual.
