Operation Manual

9
EN
3. Operating and Programming
3.2 Quick Start
Charging Dock Placement
Connect the Power Adapter to the Charging Dock.
Place the Charging Dock on a level floor surface against the wall with the base perpendicular
to the ground. Keep the immediate area 2m (6.6’) in front of the charger and 1 m (3.3’) on both
sides of the charger clear of objects and reective surfaces.
Plug the Charging Dock in.
1
Power ON
Turn the robot’s Side Power Switch to
the ON position. “l” indicates ON and “O”
indicates OFF.
2
Place DM82 on the Charging Dock making
sure the Charging Contacts on DM82
and the Charging Dock Pins make a
connection.
Charge DM82 for at least 4 hours before
the rst use.
3
Charge DM82
* DM82 is powered ON when the AUTO
Mode Button on the robot ashes GREEN.
* The AUTO Mode Button on the robot
flashes ORANGE when DM82 is charging
and glows a continuous GREEN when it
is fully charged.