SDS

Safety Data Sheet
Report No.:STR15039172S Page 5 of 11
Shenzhen SEM.Test Technology Co., Ltd.
1/F, Building A, Hongwei Industrial Park, Liuxian 2nd
Road, Bao'an District, Shenzhen, P.R.C. (518101)
Unsuitable
extinguishing
Media
Not available
Explosion
Data
Sensitivity to Mechanical Impact: This may result in rupture in extreme cases
Sensitivity to Static Discharge: Not Applicable
Specific
Hazards
arising from
the chemical
Fires involving Lithium ion Battery an be controlled with water. When water is used,
however, hydrogen gas may evolve. In a confined space, hydrogen gas can form
an explosive mixture. In this situation, smothering agents are recommended to
extinguish the fire
Protective
Equipment
and
precautions
for firefighters
As for any fire, evacuate the area and fight the fire from a safe distance. Wear a
pressure-demand, self-contained breathing apparatus and full protective gear.
Fight fire from a protected location or a safe distance. Use NIOSH/MSHA approved
full-face self-contained breathing apparatus (SCBA) with full protective gear.
NFPA Health: 0 Flammability: 0 Instability: 0
Section 6 – Accidental Release Measures
Personal Precautions, protective equipment, and
emergency procedures
Restrict access to area until completion of
clean-up. Do not touch the spilled material. Wear
adequate personal protective equipment as
indicated in Section 8.
Environmental Precautions Prevent material from contaminating soil and
from entering sewers or waterways.
Methods and materials for Containment Stop the leak if safe to do so. Contain the spilled
liquid with dry sand or earth. Clean up spills
immediately.
Methods and materials for cleaning up Absorb spilled material with an inert absorbent
(dry sand or earth). Scoop contaminated
absorbent into an acceptable waste container.
Collect all contaminated absorbent and dispose
of according to directions in Section 13. Scrub
the area with detergent and water; collect all
contaminated wash water for proper disposal.
Section 7 – Handling and Storage
Handling Do not dismantle, open or shred secondary
Lithium ion Battery;
Don’t handling Lithium ion Battery with
metalwork. Do not open, dissemble, crush or
burn battery. Ensure good ventilation/