Operation Manual

EN
10
3. Operating the Robot
Press the START/PAUSE Button on WINBOT 7
or on the Remote Control to begin cleaning.
Place WINBOT 7 on the window at least 10cm
(4’’) from the corners and other obstacles and
press it
on the window. WINBOT 7 has
successfully attached to the window when the
Status Indicator Light BLUE.
WINBOT 7’s Back-Up Battery must be fully charged
before use. Plug WINBOT 7 in, move the Power
Switch to the CHARGE position until the Status
Indicator Light glows a continuous GREEN.
Please be careful not to pull the Air Release
Trigger.
Please ensure there is a 15cm (5.9”) clearance
between the glass and obstacles in the room like
curtains or furniture.
Move the Power Switch to the “ON” position.
WINBOT 7 is powered ON when it generates
suction.
1
3.7 Start
3
4
Plug in WINBOT 7
Power ON
Place on the Glass
Start
2
*
*
*