Operation Manual

EN
11
3. Operating the Robot
1
3.8 Pause
3.9 Stop
Pause WINBOT 7 during cleaning by
pressing the START/PAUSE button on the
robot or on the Remote control.
WINBOT 7 can be directed to move forward,
backward, left and right using the Direction
Control Buttons on the Remote Control when
Paused. WINBOT 7 will clean when Direction
Control Buttons are used.
When WINBOT 7 completes its cleaning cycle, it returns to the place it started and beeps.
If WINBOT 7 has a problem and the Indicator Light glows RED, it can be reset by pressing the Reset
Button on the Remote Control.
Remove WINBOT 7
Unplug WINBOT 7
3
Remove the Safety Pod, if used
2
Pull the Air Release Trigger and remove
WINBOT 7 from the window. Polish away
any marks left on the glass from WINBOT 7’s
removal with the provided Finishing Cloth.
Grasp WINBOT 7’s handle. Move the Power
Switch to “OFF” position.
*
EN
11
3. Operating the Robot
1
3.8 Pause
3.9 Stop
Pause WINBOT 7 during cleaning by
pressing the START/PAUSE button on the
robot or on the Remote control.
WINBOT 7 can be directed to move forward,
backward, left and right using the Direction
Control Buttons on the Remote Control when
Paused. WINBOT 7 will clean when Direction
Control Buttons are used.
When WINBOT 7 completes its cleaning cycle, it returns to the place it started and beeps.
If WINBOT 7 has a problem and the Indicator Light glows RED, it can be reset by pressing the Reset
Button on the Remote Control.
Remove WINBOT 7
Unplug WINBOT 7
3
Remove the Safety Pod, if used
2
Pull the Air Release Trigger and remove
WINBOT 7 from the window. Polish away
any marks left on the glass from WINBOT 7’s
removal with the provided Finishing Cloth.
Grasp WINBOT 7’s handle. Move the Power
Switch to “OFF” position.
*