Data Sheet

EN
14
4. Maintenance
Before performing cleaning and maintenance on WINBOT 8, Power OFF and unplug WINBOT 8
from the receptacle.
4.1 Cleaning Pad
4.2 Fan, Sensors and Squeegees
Turn WINBOT 8 over and remove the Cleaning
Pad. Soak the Cleaning Pad in cool, clean
water for 2 minutes. Hand wash with mild
detergent and lay flat to dry. Allow it to dry
completely before re-attaching it to WINBOT 8.
Fan Side Rollers
Turn WINBOT 8 over and wipe any debris
from the Fan with the provided Finishing
Cloth to maintain suction.
Wipe the four Side Rollers with the provided
Finishing Cloth to maintain their effectiveness.
* Do NOT use a wet Cleaning Pad on
WINBOT 8 or it may slip on the window.
* Washing the Cleaning Pad regularly can
extend its service life.
* If the Cleaning Pad becomes worn or no
longer fits exactly within the Velcro area,
replace it with a new one to achieve best
cleaning performance.