Owner manual

5. Gently push the to the right to release the tone arm.
6. Move the tone arm gently to the edge of the record (or the starting point of a track).
The turntable will begin to turn.
clamp
Listening to a CD
1. Press the CD button.
 Never place more than one disc on the tray.
 The disc must be placed in the center of the disc tray. If the disc is not correctly loaded, it
may not be possible to open the tray again once it has closed, so you should ensure the
disc is always centered on the tray.
 Do not force the tray by hand during opening and closing operations.
4. Press the OPEN/CLOSE button to close the tray.
“-- - - -- BUSY CD” blinks for a few seconds.
When no disc is set, “NO DISC” appears
On the display.
2. Press the OPEN/CLOSE button.
3. Place a disc on the tray with the printed label facing up.
 It takes a few seconds for the unit to load the disc. No buttons will work during loading.
Wait until the total number of the tracks and the total play time of the disc are displayed.
 The disc type indicator shows the type of disc currently loaded.
16 17
CD
CD
TR
CD
5
TUN INGVOL UME
CD RE CORDE R
FINALIZE
REC
0
1 2
3
4
5
6
7 8 9
10
7
88 90 92 94 9 6 9 8 100 104 1 06 1 108
0
0
0 0
530 600 700 900 1000 0 14 171
12
0
FM
AM
MHz
KHz
PHONO
CD AM/FM
AUX
ERASE
REMOTE
SENSOR
6
33
45
78