User Guide

12
2. On Speaker A (the speaker with the Mode LED Indicator shining solid
Red), PRESS AND HOLD for 6 seconds. The Mode LED Indicator
will flash Red.
3. Once the connection between the speakers is successful, Speaker C
(and Sub D) will announce, “Connection Successful,” and start playing
music from your Bluetooth device.
Notes:
· If all the speakers are turned off, then turned on, the speaker(s) and
sub(s) in EcoCast Receiving Mode (Speakers and Subs B, C, and D)
will automatically re-connect to the speaker in Transmitting Mode
(Speaker A). If they are not automatically re-connected, please follow
the above steps. To clear pairing records on an Extreme Sub, PRESS
AND HOLD for 6 seconds.
· You can also pair the SoundExtreme with any other ECOXGEAR
speaker bearing the EcoCast symbol .
· The EcoCast functionality is only available while using Bluetooth as
your Audio Source at a maximum range of 30 feet between speakers.
· While connecting the SoundExtreme speakers, make sure that the
speakers are within a few feet of each other.
· If you do not want to connect the subwoofer wirelessly or want
to connect it to a non-ECOXGEAR amplifier or speaker, you can
connect the subwoofer via its Aux-In / Sub-In Jack, using the
supplied 3.5mm Audio Cable.
Aux-In Audio Connection
To use an Aux-In audio source, connect the audio output from the source
unit to the Extreme Sub’s Aux-In / Sub-In Jack with the supplied 3.5
Audio Cable.
Once the 3.5mm Audio Cable is plugged in, the Aux-In LED Indicator will
shine solid Blue.