User's Guide

“EcoCast Receiving,” or if the
Mode Status Indicator shines
RED or GREEN, when the
speaker is turned on, press
the EcoCast Button to
cycle through each Mode until
you hear the voice prompt,
“Speaker Mode” and the Mode
Status Indicator turns BLUE.
IMPORTANT: Make sure
that the Main Power Switch,
located on the Side Panel, is
set to the ON position. If the
switch is in the OFF position,
your EcoEdge Pro will not
be able to turn on using the
Standby Power Button.
The LED battery level indicators
are located on the top of the
unit. Each LED represents 25%
of a charge, with 4 full LEDs
indicating a full charge.
Audio playback time is
approximately 20 hours.
Important: Maintaining
Waterproofness
Your EcoEdge Pro is only
waterproof when the cap
is properly closed. In order
to properly close the cap,
push firmly to be sure the
cap fits flat and flush along
the edges with the panel.
If not properly closed the
unit is NOT watertight and
may not float.
POWER + CONNECT