Yamaha VX Footwell Speakers/Yamaha EX Footwell Speakers Model:GDI-VXYMHFTWL01 User Guide
Quick Start 1 2 3 4 5 LIMITED MANUFACTURER’S WARRANTY: Press and hold the Power Button on top of your speaker to power on one of the two VX Footwell speakers. Search your Bluetooth Connection on your Smart Device. Choose ‘FW-ECOXGEAR’ to pair. Select and play your music. Press the EcoCast Button to cycle through to EcoCast Transmitting Mode. Press and hold the Power Button on the other speaker. Press the EcoCast Button to cycle through to EcoCast Receiving Mode.
6) Completely dry and clean your ECOXGEAR prior to attempting to charge the unit. 7) Return the ECOXGEAR to Grace Digital if you suspect water ingress into the unit or if the unit has experienced a severe impact that may have affected the integrity of the unit to take on water. You should never 1) Never charge your ECOXGEAR if you suspect water has entered the device. Charging a device with water inside could be potentially hazardous and cause fire or a spark.
The Power Button color indicates battery level. GREEN: 100%-76% charge YELLOW: 75%-26% charge RED: 25%-0% charge The BLUE Bluetooth Button backlight indicates the following Bluetooth statuses. FLASHING: Ready to pair SOLID: Bluetooth connection successful The EcoCast Button color indicates the following statuses.
FCC STATEMENT: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Once connected to Speaker A, you can select and play your desired audio. Pairing Mode If the LED is not flashing or if you wish to place your VX Footwell speakers in pairing mode, press and release the Bluetooth Button on the top panel. Your VX Footwell speakers shall announce “Ready to connect” when ready to pair to a new device. NOTE: Your VX Footwell speakers shall sync & wirelessly pair with most Bluetooth enabled devices.
Specifications 3 Setting Up EcoCast on Your Two Speakers Unit Dimensions A B 12.3” 7.2” Unit Weight 6 lbs (2.72kg) System Output Power RMS 130W (65W x2) S/N Ratio 88dB +/- 3dB Power Source 14.8V, 5200mAh Lithium Ion Battery USB Input 5V, 2A Frequency Range 50Hz-20,000Hz Bluetooth Bluetooth® CSR 5.0 Up to 100 ft / 30 m Play Time Up to 50 hours at 50% volume level; up to 10 hours at 75% volume level 7.1” EcoCast Using Qualcomm® Broadcast Audio technology EcoCast Range 30 ft / 9.
Attaching VX Footwell Speakers onto Your Mounts IMPORTANT: Installation & Waterproofness Installing the VX Footwell Speaker Mounts In order to attach the VX Footwell speaker mounts, we recommend that you have a licensed Yamaha dealer drill holes into your Yamaha WaveRunner VX personal watercraft. Doing it yourself could damage your vehicle, and void the warranty. NOTE: See separate Yamaha installation instructions for proper mounting bracket and speaker installation.
EcoCast – Broadcast Your Music to Multiple Speakers The VX Footwell speakers have been specifically designed to fit into the footwell area of the Yamaha WaveRunner VX Series. x100 When you have more than two VX Footwell speakers, you can build a broadcast system by initiating EcoCast Transmitting Mode in one VX Footwell speaker and broadcasting your music to one or more VX Footwell speakers in EcoCast Receiving Mode.
Charging: USB-C Input IMPORTANT: Mounting Safety Although the Pin Latch locks each speaker into place, the speakers are NOT secure under heavy riding conditions. When riding in heavy conditions, ALWAYS install the supplied security bolt on each speaker. To remove each VX Footwell speaker from their respective mount, follow these steps: 1 Unscrew the security bolt, if it is installed. 2 While pulling on the Pin Latch (away from the vehicle), pull the speaker out (towards the front of the vehicle).
