User's Guide

To remove each VX Footwell speaker from their respective
mount, follow these steps:
Unscrew the security bolt, if it is installed.
While pulling on the Pin Latch (away from the vehicle),
pull the speaker out (towards the front of the vehicle).
1
2
IMPORTANT: Mounting Safety
Although the Pin Latch
locks each speaker into
place, the speakers are
NOT secure under heavy
riding conditions.
When riding in heavy
conditions, ALWAYS install
the supplied security bolt
on each speaker.
When the speakers drop
below a 25% battery level, each
speaker will repeat a low-
battery warning three times:
the Power Button
on each
speaker will
FLASH RED and
the speakers will announce,
“Battery low.” Then, the Power
Buttons will
FLASH RED, once
every 5 minutes.
To access the connections,
turn the waterproof caps to
the LEFT (counterclockwise).
Connect the USB cable to the
USB-C Input to charge
your VX Footwell speakers.
The backlit Power Button
indicates USB connection
Charging Status.
FLASHING RED:
Charged 0%-25%
FLASHING YELLOW:
Charged 26%-75%
FLASHING GREEN:
Charged 76%-99%
SOLID GREEN:
Full charge complete
RECOMMENDATION: Use the
USB cable and power adapter
included in the box.
NOTE: Charge time from low
to full charge is approximately
12 hours.
Charging: USB-C Input
Your speakers can be charged
while playing audio.
CAUTION: Do NOT charge
if
unit and/or connections are
wet or damp.