User's Guide

6) Completely dry and clean your ECOXGEAR prior to attempting to charge the unit.
7) Return the ECOXGEAR to Grace Digital if you suspect water ingress into the unit or if the
unit has experienced a severe impact that may have affected the integrity of the unit to
take on water.
You should never
1) Never charge your ECOXGEAR if you suspect water has entered the device. Charging a
device with water inside could be potentially hazardous and cause fire or a spark.
2) Never use your ECOXGEAR if you have dropped it or thrown it against a hard surface
which may have destroyed the integrity of the speakers, housings, or gaskets. In the event
of a severe impact to your unit please return the unit to Grace Digital to review for
potential damage.
3) Never open the auxiliary door in a water environment. This could cause water to ingress
into the unit which could potentially be hazardous and cause a fire or a spark.
4) Never connect a device to the auxiliary input jack when in a water environment. The
auxiliary jack should only be used in a dry environment.
5) Never attempt to fix, repair your ECOXGEAR unit. Please send it back to Grace Digital for
any assessments and repairs.
CARE, MAINTENANCE, & PRECAUTIONS:
1) The unit is waterproof only when the cap is properly closed.
2) Close the cap properly before use. If the unit is placed in water without the cap properly
closed, water may enter into the unit and void your warranty.
3) Dry unit completely before opening the cap. Do NOT open the cap if wet or in a
wet environment.
4) Do NOT apply excessive force to any surfaces of the unit when wet or in a
wet environment.
5) Do NOT use or store the unit in places with high temperature.
6) AVOID prolonged exposure to ultraviolet radiation (UV sunlight) and strong
magnetic fields.
7) Periodically check the rubber seal for premature wear.
8) Periodically clean the rubber with a soft moist cloth and ensure no objects such as
dirt, hair, or sand are on the rubber seal ring. Do NOT use any oily solvent or chemicals
for cleaning.
9) Rinse off the unit with tap water after use in salt water or swimming pool.
10) Power and / or charge the built-in rechargeable battery for portable use by connecting
the USB cord to a computer USB connection or to an AC outlet using the AC-to-USB
cord 5V, 1A power adapter intended for use with the unit.
11) Noise and audio distortion may occur when the batteries are nearing end of charge.
12) Do NOT remove the built-in battery. Do NOT remove the grill covers.
Control Buttons & Operations
On/Off
PRESS AND HOLD the
Power Button to power
ON/OFF.
Bluetooth
When turned ON, the VX
Footwell speakers will power
on and search for your
Bluetooth. Refer to Set Up
Recommendations 1-2-3
part for details.
EcoCast
Use this button to cycle
through Speaker Mode,
EcoCast Transmitting Mode,
and Receiving Mode. Refer to
Set Up Recommendations
1-2-3 part and EcoCast
– Broadcast Your Music to
Multiple Speakers for details.
Speaker Volume
Press button once to
decrease or to increase
Speaker Volume.
NOTE: Some Bluetooth
devices may require to be
manually set for maximum
audio level.
Track Selection
PRESS AND HOLD to select
Previous Song track &
Next Song track .
Play/Pause/Answer
Press button once to pause
or play song tracks.
When receiving an incoming
phone call, press button once
to answer. Press button again
to hang up. You can also
PRESS AND HOLD to reject
an incoming call.
Speakerphone Mic
The integrated Speakerphone
Mic on the Top Panel allows
you to answer mobile calls.
LED Status Indicators
Three of the VX Footwell
speakers’ backlit buttons also
serve as Status Indicators:
the Power Button ,
the Bluetooth Button ,
and the EcoCast Button .
2
3