User Manual

After a few seconds, the screen will change to show:

Initializing

Network

After a few seconds, the screen will change to show:

Scan for networks

Enter network

View Config

Edit Config

Step 2 - Scan for a wireless network connection

When the display shows brackets next to the words <Scan for networks>, press the ‘Select’ dial.

(NOTE: IF you make an error at any point, press the ‘Back’ button to return the previous screen)

The WI-FI INTERNET RADIO will now scan for all available wireless networks and will display:

Scanning

IIIIIIIIIIIIIIIIIII

IF the radio does not find a wireless network router, the display will show:

No networks

Found

IF this happens after subsequent attempts you should check the status of your Wi-Fi router - see the

instructions supplied with your wireless router / modem or contact the person who set up your home

computer network.

When the WI-FI INTERNET RADIO finds your wireless network, the display will show the SSID (the

name of your home wireless network) - this is the name ascribed to your Wi-Fi router by the person who

set up your network - for example: