Operating instructions

Parts Listing: Chimney Vent Models HML80(C2,CRF2) and HMLV80(C2,CRF2)

Ref. No. Description Part No.

Blower Assembly Direct Drive 30146

Blower Assembly Direct Drive ECM 109007271

Blower Housing and Wheel, 100-10T DD (HML and HMLV) 30626

Blower Motor, 1/2 hp, 4-Speed 102000131

Blower Motor, 1/2 hp, ECM Programmed 109007272

Right Side Panel, Air Bafﬂ e HML80 and HMLV80 17811

Motor Mount Arms – 10-10 DD Blower (3 per unit) 26251

Motor Run Capacitor, 10 mfd @ 370 Vac 27743

Capacitor Strap 27761

Blower Slide Rail 2 Per 27733

36 Right Side Panel, Air Bafﬂ e HML- 80C and HMLV-80C 27731

* Blocked Vent Safety Switch Kit Complete 30693

* Blocked Vent Safety Switch - Replacement Switch Only 30660

Ref. No. Description Part No.

All parts are the same as listed on previous pages for chimney vent except where noted below.

Flue Connector Assembly 6” to 4” 90º Elbow 240008224

14 Pouch Gasket (Second gasket required for Direct Vent) 2080175

Flue Collar Gasket (Second gasket required for Direct Vent) 102000131

28 Wire Harness, Controls, Fan timer, Direct Vent 30745

Beckett Oil Burner AFII 85 30069

Burner Motor 1/7 HP 3450 RPM PSC 28907

Beckett Clean-cut Oil Pump A2EA6520 29688

Solid State Ignitor 28558

Oil Primary Combustion Control 7505P1530

Air Tube Combination FBX80HGXS 28561

Flame Retention Head (FB3) 28533

Nozzle, 0.60/60°A 28017

34 Riello Oil Burner 40BF3 30700

* Pressure Switch -0.28" WC 30693

* 10 Second Bypass Timer GPS00C9X10 (Use with Beckett AFII) 30699

* 25 Second Bypass Timer GPS00C9X25 (Use with Riello 40BF3)) 240005182

Parts Listing: Direct Vent Models HML80(CB2U2,CRBU2) and HMLV80(CB2U2,CRBU2)

PARTS LISTING