Assembly Manual

4
Install Lower Dividers to Bottom Shelf
2
Install Upper Dividers to Upper Shelf
1
Install the Casters onto Bottom Shelf
3
Install Middle Divider to Lower Shelf
Install the four Casters (I2) into the pre-drilled holes on the underside of the Bottom Shelf (D),
with four Phillips Screws (I1) per caster, using a Phillips screwdriver.
Install one Divider (G) on to the Lower Shelf (D) with two Hex Screws (H) using the Hex Tool.
Note: The grooves on the Lower Shelf are away from the ground.
Place two Cam Locks (I2) into the recessed holes on each Divider (G), with the arrow facing
the closest edge.
Install two Dividers (G) on to the Upper Shelf (C) with four Hex Screws (H) using the Hex Tool.
Note: The grooves on the Upper Shelf are away from the ground.
Place two Cam Locks (I2) into the recessed holes on each Divider (G), with the arrow facing the
closest edge.
Install two Dividers (G) on to the Bottom Shelf (E) with four Hex Screws (H) using the Hex Tool.
Note: The groove on the Bottom Shelf is away from the ground.
Place two Cam Locks (I2) into the recessed holes on each Divider (G), with the arrow facing the
closest edge.
See Next Page
Batch ID Sticker