Assembly Manual

7
8
Connect Upper Shelf to Middle Divider
Install Right Side Panel
5
Connect Lower Shelf to Lower Dividers
6
Connect Top Panel to Upper Dividers
Install the Right Side Panel (A2) on to the Top Panel (B), Upper & Lower Shelves (C, D) &
Bottom Shelf (E) with eight Hex Screws (H) using the Hex Tool.
Install four Cam Posts (I1) into the threaded plastic inserts on the underside of Lower Shelf (D)
with a Phillips screwdriver.
Reminder: Do not overtighten, as the plastic threads can be stripped.
Insert the Lower Shelf (D) Cam Posts into the holes on the top edge of the Lower Dividers (G).
Turn the Cam Locks (I2) clockwise with a Phillips screwdriver to lock the Lower Dividers (G)
onto the posts.
Install two Cam Posts (I1) into the threaded plastic inserts on the underside of Upper Shelf (C)
with a Phillips screwdriver.
Reminder: Do not overtighten, as the plastic threads can be stripped.
Insert the Upper Shelf (C) Cam Posts into the holes on the top edge of the Middle Divider (G).
Turn the Cam Locks (I2) clockwise with a Phillips screwdriver to lock the Middle Divider (G)
onto the posts.
See Next Page
Install four Cam Posts (I1) into the threaded plastic inserts on the underside of Top Panel (B)
with a Phillips screwdriver.
Reminder: Do not overtighten, as the plastic threads can be stripped.
Insert the Top Panel (B) Cam Posts into the holes on the top edge of the Upper Dividers (G).
Turn the Cam Locks (I2) clockwise with a Phillips screwdriver to lock the Upper Dividers (G)
onto the posts.
Note: The groove on the Top Panel is away from the ground.