Operation Manual

SiS965/SiS965L SATA RAID Setup Guide

Create RAID

• SIS965 controller support RAID 0, RAID 1, RAID 0+1 and JBOD.

• SIS965L controller support RAID 0, RAID 1 and JBOD.

• The selection of RAID 0+1 will appear when 4 single HDD existing

Creating a RAID 0 (Stripe) Array for Performance

• SiS965 enables users to create striped arrays with 2, 3, or 4 drives.

• SiS965L enables users to create striped arrays with 2 drives.

To create an array for best performance, follow these steps:

1 Press <A> to start creating a RAID array.

2 Press <2> and <Enter> to select RAID 0.

3 You will have two selections to create a RAID 0 array. The default value is

<1>. If you select <1>Auto Create, you can create a RAID 0 array faster and

easier. The Blocksize will be selected by its default value “64K”. The result

after creating will be show on step 8. Besides, you also can select <2>Manual

Create, see following steps.

4 Press <1>-<5> keys and <Enter> to select Block Size. (Default:64K)