Specifications

37
Using BIOS
Suspend Time Out (Disabled)
This sets the timeout for Suspend mode in minutes. If the time selected passes without any
system activity, the computer will enter power-saving Suspend mode.
Power Button Mode (On/Off)
This item lets you install a software power down controlled by the normal power button on
your system.
Restore on AC Power Loss (Power Off)
This item defines how the system will act after AC power loss during system operation.
When you set to Off, it will keep the system in Off state until the power button is pressed.
PS/2 Keyboard/Mouse Wakeup (Disabled)
These items enable or disable you to allow keyboard or mouse activity to awaken the system
from power saving mode.
Resume On Ring (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the Modem. You must
use an ATX power supply in order to use this feature.
Resume On LAN (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume on LAN. You must use an ATX power supply in order
to use this feature.
Resume On PME# (Enabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the PCI Modem or
PCI LAN card. You must use an ATX power supply in order to use this feature. Use this
item to do wake-up action if inserting the PCI card.
USB Device Wakeup From S3 (Disabled)
This item allows you to enable/disable the USB device Wakeup function from S3/S4 mode.
Resume On RTC Alarm (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume at a fixed time based on the system’s RTC (realtime
clock). Use the items below this one to set the date and time of the wake-up alarm.
You must use an ATX power supply in order to use this feature.
Press <Esc> to return to the main menu setting page.