Specifications

Using BIOS

Power Management Setup

Resume By RING [Disabled]

Resume By PME [Disabled]

Resume By USB 1.x/2.0 (S3) [Disabled]

Resume By PS2 KB (S3) [Disabled]

Resume By PS2 MS (S3) [Disabled]

EUP Function [Enabled]

Power LED Type [Dual Color LED]

About Resume by RING

Power Management Setup

This page sets up some parameters for system power management operation.

Resume By PME (Disabled)

This item specifies whether the system will be awakened from power saving modes

when activity or input signal of the specified hardware peripheral or component is

detected.

Resume By USB 1.x/2.0 (S3) (Disabled)

This item allows you to enable/disable the USB 1.x/2.0 device wakeup function from

S3 mode.

Main Advanced Chipset M.I.B.III Boot Security Save & Exit

EUP Support (Enabled)

This item allows user to enable or disable EUP support.

Press <Esc> to return to the Advanced Menu page.

Resume By RING (Disabled)

An input signal on the serial Ring Indicator (RI) line (in other words, an incoming call

on the modem) awakens the system from a soft off state.

Power LED Type (Dual Color LED)

This item shows the type of the Power LED.

Resume By PS2 MS (S3) (Disabled)

This item enables or disables you to allow mouse activity to awaken the system from

power saving mode.

Resume By PS2 KB (S3) (Disabled)

This item enables or disables you to allow keyboard activity to awaken the system

from power saving mode.

+/- : Change Opt.

: Select Screen

/Click: Select Item

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC/Right Click: Exit

Enter/Dbl Click : Select