Specifications

Using BIOS

Power Management Setup

This page sets up some parameters for system power management operation.

Power Management Setup

ACPI Suspend Type (S3)

Use this item to define how your system suspends. In the default, S3, the suspend

mode is a suspend to RAM, i.e, the system shuts down with the exception of a refresh

current to the system memory.

PWRON After PWR-Fail (Power Off)

This item enables your computer to automatically restart or return to its operating

status.

Resume By PCI/PCI-E/Lan PME (Disabled)

The system can be turned off with a software command. If you enable this item, the

system can automatically resume if there is an incoming call on the PCI Modem or

PCI LAN card. You must use an ATX power supply in order to use this feature. Use

this item to do wake-up action if inserting the PCI card.

Resume By USB (S3) (Disabled)

This item allows you to enable/disable the USB device wakeup function from S3

mode.

Select the ACPI

state used for

System Suspend.

Help Item

ACPI Suspend Type S3

PWRON After PWR-Fail Power Off

Resume By PCI/PCI-E/Lan PME Disabled

Resume By USB (S3) Disabled

EUP Support Enabled

F10: Save ESC: Exit+/-/: Value

Enter : Select

F9: Optimized Defaults

F1:General Help

: Move

mnlk

Press <Esc> to return to the main menu setting page.

EUP Support (Enabled)

This item allows user to enable or disable EUP support.