User manual

Chapter 3
Z97-PK USER MANUAL
42
Trusted Computing
Use this item to show the information of trusted computing configuration.
Enables or Disables BIOS
support for security device.
O.S. will not show Security
Device. TCG EFI protocol and
INT1A interface will not be
available.
Main Advanced Chipset M.I.B. III Security Boot Exit
+/- : Change Opt.
Enter/Dbl Click : Select


: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
TPM Support (Enabled)
Use this item to enable or disable the TPM support. O.S. will not show TPM. Reset
of platform is required.
Pending operation (None)
Schedule an Operation for the Security Device. NOTE: Your Computer will reboot
during restart in order to change State of Security Device.
TPM State (Disabled)
Use this item to enable or disable the security device.
Press <Esc> to return to the Advanced Menu page.
TPM Active Status (Deactivated)
This item displays the TPM status to be activated or not.
TPM Enabled Status (Disabled)
This item displays the TPM status to be enabled or not.
TPM Owner Status (Unowned)
This item displays the TPM status to be owned or not.
Configuration
TPM Support Enabled
TPM State Disabled
Pending operation None
Current Status Information
TPM Enabled Status: Disabled
TPM Active Status: Deactivated
TPM Owner Status: Unowned