User manual

ECTACO iTRAVL
®
User Manual
10
Key Function(s)
On/Off Turn the device On or Off. When the device is on, press and hold the
On/Off button to turn the backlight On or Off.
LED Blinking blue – recording is in progress or data being transferred.
Blinking red – SD card is being scanned, or the battery is critically
low.
Microphone
Button
Use speech recognition (press and hold). Move highlight up (press
and release). Page up.
Speaker
Button
Use speech function (press and hold). Move highlight down (press
and release). Page down.
Left Soft Key
/Right Soft Key
Activate menu or perform touch-button action.
POWER SUPPLY
ECTACO iTRAVL
®
is powered by a special Li-Polymer rechargeable battery. When the
battery becomes weak, the red LED signal starts blinking. In that case, the voice function
will be disabled in order to prevent excessive discharge of the battery and a resulting loss
of data in RAM. To restore full functionality of the device, recharge the battery as soon as
possible.
How to Recharge the Battery
• Make sure the battery is inserted in the battery compartment.
♦ Note: Only a special rechargeable battery, special charger, and special USB cable or
USB cradle may be used with your ECTACO iTRAVL
®
. Use of an inappropriate
external power supply may cause failure of the device and will void the warranty.