User manual

ECTACO
®
iTRAVL
®
User Manual
10
Using the USB Cradle
The USB cradle is available as an optional accessory. You can use it to connect
ECTACO
®
iTRAVL
®
to your PC.
• Connect the USB cradle to your PC using the special USB cable.
• Insert the device into the cradle.
You can use the USB cradle to recharge a spare battery.
SD Card
Before you start using your ECTACO
®
iTRAVL
®
, please make sure the SD card (included
in the standard package) is installed into the SD slot of the device. If the card is not
installed, slide it into the slot located on the left edge of the device – the label of the card
face up, contacts face down. Push the card gently until it clicks into place. To eject the
card, just push it in slightly.
♦ Note: If the SD slot is covered, please detach the slot cover before you install the card.
ECTACO
®
iTRAVL
®
supports SD cards of up to 4GB capacity.
PC Communication
The PC Communication function allows you to manage files and folders stored on the SD
card. For example, you may wish to add music files.
• Ensure the SD card is installed into the device.
• Turn the device on.
• Connect the device to your PC using the special USB cable or USB cradle and the
mini-USB port located on the device (see General View).
Please wait while your PC detects the device.