User manual

ECTACO
®
jetBook
®
User Manual
6
• When the device is powered on, press the On/Off button to turn it off.
Recharging the Battery
ECTACO
®
jetBook
®
can operate continuously for over 24 hours. When the battery becomes weak, the
battery life picture is shown as
. To restore full functionality of the device, recharge the battery as soon
as possible.
We recommend that you recharge your jetBook
®
at night during at least four hours.
9 Only a special charger may be used with your ECTACO
®
jetBook
®
. Use of an inappropriate external
power supply may cause failure of the device and will void the warranty.
• Unfasten the mini-USB port cover.
• Connect the AC/DC adapter to your device via the mini-USB port (see General View). The green LED
signal shows that the battery is recharging. It normally takes 5 hours to recharge a depleted battery.
You can also recharge the battery using the supplied USB cable. However, it is recommended that you use
the special charger.
9 Charge the battery overnight prior to the first use of the device.
Initialization
In the rare event that the data on the screen is corrupted or a program is not responding properly, you will
need to perform a reset. The Reset button is located on the back of the device. It can be accessed with any
thin object like a paper clip. Never use a needle or a sharp pin for this purpose since it can damage the
device.
• After pressing the Reset button, press and hold the On/Off button for 3 seconds to turn the device on.
INSTALLING SD CARD
ECTACO
®
jetBook
®
supports SD cards of up to 2GB capacity for storing thousands of books.
• Unfasten the SD slot cover.
• If the card is not installed, slide it into the slot – the contacts of the card face up, label face down. Push
the card gently until it clicks into place.
• To eject the card, just push it in slightly.
MAIN MENU
To display the Main Menu, turn the device on and/or press and hold the key for 3 seconds. The Main
Menu consists of the following sections: Books, Audio Books, Pictures, and Settings.
READING BOOKS
ECTACO
®
jetBook
®
comes with a set of preinstalled books. It also allows downloading additional books
from various sources. The following book formats are supported: TXT (text files), FB2 (FictionBook),
Mobipocket (.mobi), PRC, EPUB, RTF, and PDF. For best performance, it is recommended that you
use TXT (text) files.