User manual

ECTACO
®
jetBook
®
User Manual
9
We recommend that you recharge your jetBook
®
at night during at
least four hours.
9 Only a special charger may be used with your ECTACO
®
jetBook
®
.
Use of an inappropriate external power supply may cause
failure of the device and will void the warranty.
• Unfasten the mini-USB port cover.
• Connect the AC/DC adapter to your device via the mini-USB port
(see General View). The green LED signal shows that the battery
is recharging. It normally takes 5 hours to recharge a depleted
battery.
You can also recharge the battery using the supplied USB cable.
However, it is recommended that you use the special charger.
Initialization
In the rare event that the data on the screen is corrupted or a
program is not responding properly, you will need to perform a reset.
The Reset button is located on the back of the device. It can be
accessed with any thin object like a paper clip. Never use a needle
or a sharp pin for this purpose since it can damage the device.
• After pressing the Reset button, press and hold the On/Off button
for 3 seconds to turn the device on.