User`s manual

ECTACO Partner

X8 Quick Start

English Language Tutor

The English Language Tutor course is stored on the special card

provided in the standard package.

How to Install or Remove the Card

• Make sure the device is turned off and there is no other card

installed in the CF slot of your ECTACO Partner

X8.

• Pull the ejector switch down to set it to the Unlock position.

• Insert the English Language Tutor card into the CF slot

thoroughly.

• Set the ejector switch to the Lock position.

Always use the ejector when installing or removing the card.

Never insert or remove the card when the device is on. Use the

ON/OFF button to turn the device off.

Use of unspecified cards may cause device failure and

possible loss of user's data. Always use the original English

Language Tutor cards manufactured by ECTACO, Inc.

• To eject the card, set the ejector switch to the Unlock position

and move it towards the Eject B Card mark.

• Remove the English Language Tutor card from the slot.

Electronic Interactive System

• Install the English Language Tutor card into your ECTACO

Partner

X8.

• Press the ON/OFF button to turn the device on.

• Select English Tutor from the MAIN MENU or press the

key.

You will be prompted to register.